NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
An 8 GB DDR3L 1066 ECC registered DIMM with 4Rx8 organisation and 1.35 V operation
This 8 GB DDR3L 1066 ECC registered DIMM is built for server and workstation platforms that require error-correcting memory. The module runs at PC3L-8500 speed with a CAS latency of CL7 and operates at the low 1.35 V DDR3L voltage. It targets administrators upgrading or repairing compatible IBM-Lenovo systems.
The stick uses a standard 240-pin DIMM form factor and a 4Rx8 rank layout with major-brand chips. Registered buffering reduces electrical load on the memory controller, allowing larger memory populations in multi-socket boards. The pin-out matches the DDR3L keying so it only fits slots wired for 1.35 V operation.
At 1.35 V the module draws less power and generates less heat than standard 1.5 V DDR3, helping chassis airflow in dense rack enclosures. ECC circuitry adds minimal overhead while correcting single-bit errors in real time. The registered design keeps signal integrity stable under sustained workloads without increasing acoustic noise.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1066 (PC3L 8500) |
| CAS Latency | CL7 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
It runs at DDR3L 1066 (PC3L-8500) with CL7 latency and 1.35V operation.
A DDR3 DIMM slot with 240 pins; the registered design requires a server or workstation motherboard that supports RDIMMs.
Power down, open the chassis, align the notch on the 240-pin edge connector, press firmly until both clips lock, then verify in BIOS that ECC and registered modes are enabled.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?