NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
An 8 GB DDR3L 1066 ECC registered DIMM with 4Rx8 organisation and 1.35 V operation
This 8 GB DDR3L 1066 ECC registered DIMM is built for server and workstation platforms that require error-correcting memory. The module runs at PC3L-8500 speed with a CAS latency of CL7 and operates at the low 1.35 V DDR3L voltage. It targets administrators upgrading or repairing compatible IBM-Lenovo systems.
The stick uses a standard 240-pin DIMM form factor and a 4Rx8 rank layout with major-brand chips. Registered buffering reduces electrical load on the memory controller, allowing larger memory populations in multi-socket boards. The pin-out matches the DDR3L keying so it only fits slots wired for 1.35 V operation.
At 1.35 V the module draws less power and generates less heat than standard 1.5 V DDR3, helping chassis airflow in dense rack enclosures. ECC circuitry adds minimal overhead while correcting single-bit errors in real time. The registered design keeps signal integrity stable under sustained workloads without increasing acoustic noise.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1066 (PC3L 8500) |
| CAS Latency | CL7 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
It runs at DDR3L 1066 (PC3L-8500) with CL7 latency and 1.35V operation.
A DDR3 DIMM slot with 240 pins; the registered design requires a server or workstation motherboard that supports RDIMMs.
Power down, open the chassis, align the notch on the 240-pin edge connector, press firmly until both clips lock, then verify in BIOS that ECC and registered modes are enabled.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?