Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
C&N single-port 10Gbps PCIe x4 network card with Marvell AQC107S chipset

C&N

C&N Single Port 10Gbps PCIe x4 Network Card with Marvell AQC107S

SKU CH-ENY2-2TF6P

Adds a single 10 Gbps Ethernet port over PCIe x4 with multi-gigabit speeds down to 100 Mbps and Mac OS support

  • StandardsEthernet
  • Speed10 gigabits_per_second
  • ConnectorsEthernet
  • Interfacepci_express_x4
  • BUSpci_express_x4
  • FeaturesDesktop
  • 10 Gbps Ethernet over existing Cat 5e cabling
  • PCIe x4 interface compatible with Gen 3 and Gen 2 slots
  • Offloads checksum and large-send tasks to cut CPU load
  • Supports Windows, Linux and macOS operating systems
  • Jumbo frames up to 16 kbytes boost throughput

Single-port 10 GbE NIC

This C&N network card adds a single 10 Gbps Ethernet port to a desktop or server through a PCIe x4 slot. It uses the Marvell AQC107S controller to deliver multi-gigabit connectivity for workstations, NAS units or small-business servers that need faster wired throughput than standard gigabit adapters provide.

PCIe x4 bandwidth and cabling limits

The card operates at PCIe 3.0 x4 (8.0 GT/s per lane) and is backward compatible with PCIe 2.0 x4 (5.0 GT/s per lane). At 10 GBASE-T speeds it requires Category 6a or Category 7 cabling to reach 100 metres; Category 6 is limited to 55 metres. For 5 GbE and 2.5 GbE links, existing Category 5e runs of up to 100 metres are sufficient.

Marvell AQC107S controller

The AQC107S chipset integrates NBASE-T PHY technology and supports 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-T auto-negotiation. It provides hardware offloads for IPv4/IPv6 checksums, large send, RSS, DCA and jumbo frames up to 16 kbytes, plus IEEE 1588v2 precision timing and Energy Efficient Ethernet for reduced host CPU load.

Punti di forza

  • 10 Gbps Ethernet over existing Cat 5e cabling
  • PCIe x4 interface compatible with Gen 3 and Gen 2 slots
  • Offloads checksum and large-send tasks to cut CPU load
  • Supports Windows, Linux and macOS operating systems
  • Jumbo frames up to 16 kbytes boost throughput

Caratteristiche tecniche

BrandC&N
StandardsEthernet
Speed10 gigabits_per_second
ConnectorsEthernet
Interfacepci_express_x4
BUSpci_express_x4
FeaturesDesktop

Domande su questo articolo

Should I pick a PCIe x4 or x8 slot for this 10 Gbps card?

This card uses a PCIe x4 connector and is compliant with PCI Express 3.0 and 2.0, so it fits and runs at full speed in any x4, x8 or x16 slot.

What real throughput can I expect from the 10 Gbps rating on my PC?

The Marvell AQC107S controller delivers line-rate 10 GbE performance and supports auto-negotiation down to 5 GbE, 2.5 GbE, 1 GbE and 100 MbE depending on your switch and cabling.

Which PCIe generation limits the card and what cabling does 10 Gbps need?

The card operates at PCIe 3.0 x4 (8.0 GT/s per lane) or 2.0 x4 (5.0 GT/s per lane); 10GBASE-T requires Cat 6a for 100 m or Cat 6 for up to 55 m.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.