暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
C&N single-port 10Gbps PCIe x4 network card with Marvell AQC107S chipset

C&N

C&N Single Port 10Gbps PCIe x4 Network Card with Marvell AQC107S

SKU CH-ENY2-2TF6P

Adds a single 10 Gbps Ethernet port over PCIe x4 with multi-gigabit speeds down to 100 Mbps and Mac OS support

  • StandardsEthernet
  • Speed10 gigabits_per_second
  • ConnectorsEthernet
  • Interfacepci_express_x4
  • BUSpci_express_x4
  • FeaturesDesktop
  • 10 Gbps Ethernet over existing Cat 5e cabling
  • PCIe x4 interface compatible with Gen 3 and Gen 2 slots
  • Offloads checksum and large-send tasks to cut CPU load
  • Supports Windows, Linux and macOS operating systems
  • Jumbo frames up to 16 kbytes boost throughput

Single-port 10 GbE NIC

This C&N network card adds a single 10 Gbps Ethernet port to a desktop or server through a PCIe x4 slot. It uses the Marvell AQC107S controller to deliver multi-gigabit connectivity for workstations, NAS units or small-business servers that need faster wired throughput than standard gigabit adapters provide.

PCIe x4 bandwidth and cabling limits

The card operates at PCIe 3.0 x4 (8.0 GT/s per lane) and is backward compatible with PCIe 2.0 x4 (5.0 GT/s per lane). At 10 GBASE-T speeds it requires Category 6a or Category 7 cabling to reach 100 metres; Category 6 is limited to 55 metres. For 5 GbE and 2.5 GbE links, existing Category 5e runs of up to 100 metres are sufficient.

Marvell AQC107S controller

The AQC107S chipset integrates NBASE-T PHY technology and supports 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-T auto-negotiation. It provides hardware offloads for IPv4/IPv6 checksums, large send, RSS, DCA and jumbo frames up to 16 kbytes, plus IEEE 1588v2 precision timing and Energy Efficient Ethernet for reduced host CPU load.

特長

  • 10 Gbps Ethernet over existing Cat 5e cabling
  • PCIe x4 interface compatible with Gen 3 and Gen 2 slots
  • Offloads checksum and large-send tasks to cut CPU load
  • Supports Windows, Linux and macOS operating systems
  • Jumbo frames up to 16 kbytes boost throughput

仕様

BrandC&N
StandardsEthernet
Speed10 gigabits_per_second
ConnectorsEthernet
Interfacepci_express_x4
BUSpci_express_x4
FeaturesDesktop

この商品に関する質問

Should I pick a PCIe x4 or x8 slot for this 10 Gbps card?

This card uses a PCIe x4 connector and is compliant with PCI Express 3.0 and 2.0, so it fits and runs at full speed in any x4, x8 or x16 slot.

What real throughput can I expect from the 10 Gbps rating on my PC?

The Marvell AQC107S controller delivers line-rate 10 GbE performance and supports auto-negotiation down to 5 GbE, 2.5 GbE, 1 GbE and 100 MbE depending on your switch and cabling.

Which PCIe generation limits the card and what cabling does 10 Gbps need?

The card operates at PCIe 3.0 x4 (8.0 GT/s per lane) or 2.0 x4 (5.0 GT/s per lane); 10GBASE-T requires Cat 6a for 100 m or Cat 6 for up to 55 m.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。