NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Kingston Technology Corp.
8 GB DDR4 2133 ECC unbuffered DIMM with CL15 timing and 1.2 V operation for compatible servers and workstations
This 8 GB DDR4 module runs at 2133 MHz with CL15 timings and 1.20 V operation. It provides ECC error correction in an unbuffered 288‑pin DIMM format. The dual‑rank 2Rx8 organisation suits workstations and entry‑level servers that require data integrity. Kingston ValueRAM branding indicates standard validated reliability.
Buyers needing registered or load‑reduced modules cannot use this stick. Systems limited to non‑ECC memory will not benefit from the error‑correction feature. Builds requiring capacities above 8 GB per slot or speeds beyond 2133 MHz should select different modules.
The combination of unbuffered signalling and on‑die ECC is the decisive attribute for motherboard compatibility. Only boards that explicitly support unbuffered ECC DDR4 at 2133 MHz will POST correctly with this part. Verify the platform memory qualification list before ordering.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR21E15D8/8HA |
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Features | Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP - 2.5V Typical VDDSPD = 2.2V to 3.6V Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals Low-power auto self refresh (LPASR) Data bus inversion (DBI) for data bus On-die VREFDQ generation and calibration Dual-rank On-board I2 serial presence-detect (SPD) EEPROM Temperature sensor with integrated SPD 16 internal banks; 4 groups of 4 banks each Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) Selectable BC4 or BL8 on-the-fly (OTF) Fly-by topology Terminated control |
| Peso di spedizione | 0.03 kg |
| Dimensioni del pacco | 146 × 46 × 8 mm |
The module runs at 2133 MHz, delivering up to PC4 17000 bandwidth for workloads that can use that throughput.
The 288-pin DDR4 connection caps transfer rate at 2133 MHz, so faster CPUs or chipsets cannot push this memory beyond that speed.
It requires a standard 288-pin DDR4 DIMM slot and enough vertical clearance for a module without a heat spreader.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?