Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR3 SODIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB DDR3 1333 SODIMM Kit POSIFLEX XT-5517 JIVA

SKU CH-5ECH-3WRJM

16 GB DDR3 1333 SODIMM kit (2 × 8 GB) for POSIFLEX XT-5517 JIVA 17" terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 16 GB dual-channel kit boosts POS terminal responsiveness
  • 1333 MHz DDR3 speed matches POSIFLEX XT-5517 JIVA specifications
  • 35 V low-voltage modules reduce power draw
  • 204-pin SODIMM form factor fits foldable 17" terminal slot
  • Major OEM chips from Samsung, Micron, Hynix ensure reliability

System-Specific POS Memory Kit

This 16 GB DDR3 SODIMM kit is built for the POSIFLEX XT-5517 JIVA foldable 17-inch terminal. It contains two matched 8 GB modules that install directly into the system's 204-pin slots without configuration changes.

Low-Voltage Unbuffered Operation

The modules run at 1.35 V with a standard DDR3 1333 MT/s data rate and CL9 latency. Unbuffered, non-ECC chips from major OEM suppliers keep power draw modest and thermals predictable inside the compact point-of-sale enclosure.

2Rx8 Dual-Rank Organisation

Each 8 GB stick uses a 2Rx8 layout that the terminal's memory controller expects. A different rank structure or a single 16 GB module would not be recognised, so this exact kit is the only drop-in upgrade path for the target hardware.

Punti di forza

  • 16 GB dual-channel kit boosts POS terminal responsiveness
  • 1333 MHz DDR3 speed matches POSIFLEX XT-5517 JIVA specifications
  • 35 V low-voltage modules reduce power draw
  • 204-pin SODIMM form factor fits foldable 17" terminal slot
  • Major OEM chips from Samsung, Micron, Hynix ensure reliability

Caratteristiche tecniche

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Domande su questo articolo

How do I install the 204-pin SODIMM modules into the POSIFLEX XT-5517 JIVA terminal and what step is often missed?

Power off the terminal, open the memory compartment, align the notch on each 204-pin module with the slot key, insert at an angle then press down until the side clips click; the step often missed is verifying both clips lock fully on each 8GB stick.

What maintenance or replacement will this 16GB DDR3 kit need during its service life?

The modules have no heat spreaders and use standard 1.50 V DDR3 chips, so no scheduled maintenance is required; replacement is only needed if a module fails, which is covered by the manufacturer's lifetime replacement warranty.

What limit appears first when the POS terminal runs sustained workloads with this memory?

The DDR3 1333 MT/s speed and CL9 latency set the bandwidth ceiling, so memory throughput becomes the first bottleneck under continuous heavy transaction loads.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.