BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00278333BTC
Op voorraad
NEMIX RAM
NEMIX RAM 16GB DDR3 1333 SODIMM Kit POSIFLEX XT-5517 JIVA
16 GB DDR3 1333 SODIMM kit (2 × 8 GB) for POSIFLEX XT-5517 JIVA 17" terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 16 GB dual-channel kit boosts POS terminal responsiveness
- 1333 MHz DDR3 speed matches POSIFLEX XT-5517 JIVA specifications
- 35 V low-voltage modules reduce power draw
- 204-pin SODIMM form factor fits foldable 17" terminal slot
- Major OEM chips from Samsung, Micron, Hynix ensure reliability
System-Specific POS Memory Kit
This 16 GB DDR3 SODIMM kit is built for the POSIFLEX XT-5517 JIVA foldable 17-inch terminal. It contains two matched 8 GB modules that install directly into the system's 204-pin slots without configuration changes.
Low-Voltage Unbuffered Operation
The modules run at 1.35 V with a standard DDR3 1333 MT/s data rate and CL9 latency. Unbuffered, non-ECC chips from major OEM suppliers keep power draw modest and thermals predictable inside the compact point-of-sale enclosure.
2Rx8 Dual-Rank Organisation
Each 8 GB stick uses a 2Rx8 layout that the terminal's memory controller expects. A different rank structure or a single 16 GB module would not be recognised, so this exact kit is the only drop-in upgrade path for the target hardware.
Pluspunten
- 16 GB dual-channel kit boosts POS terminal responsiveness
- 1333 MHz DDR3 speed matches POSIFLEX XT-5517 JIVA specifications
- 35 V low-voltage modules reduce power draw
- 204-pin SODIMM form factor fits foldable 17" terminal slot
- Major OEM chips from Samsung, Micron, Hynix ensure reliability
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Vragen over dit artikel
How do I install the 204-pin SODIMM modules into the POSIFLEX XT-5517 JIVA terminal and what step is often missed?
Power off the terminal, open the memory compartment, align the notch on each 204-pin module with the slot key, insert at an angle then press down until the side clips click; the step often missed is verifying both clips lock fully on each 8GB stick.
What maintenance or replacement will this 16GB DDR3 kit need during its service life?
The modules have no heat spreaders and use standard 1.50 V DDR3 chips, so no scheduled maintenance is required; replacement is only needed if a module fails, which is covered by the manufacturer's lifetime replacement warranty.
What limit appears first when the POS terminal runs sustained workloads with this memory?
The DDR3 1333 MT/s speed and CL9 latency set the bandwidth ceiling, so memory throughput becomes the first bottleneck under continuous heavy transaction loads.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00280922BTC
Op voorraad
