Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2133 ECC RDIMM CL15 1.2V 288-pin memory upgrade

SKU CH-7KKS-F177W

A 16 GB DDR4 2133 ECC registered DIMM running at 1.2 V with CL15 latency for server memory upgrades

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 ECC RDIMM protects server data integrity
  • Registered 1Rx4 design stabilises heavy workloads
  • CL15 latency at 2133 MT/s speeds response
  • 2V operation reduces power draw per module
  • 288-pin form factor fits compatible DDR4 slots

16GB DDR4 ECC Registered Module

This 16GB DDR4 2133MHz ECC RDIMM provides registered memory for server and workstation platforms. It operates at 1.2V with a CL15 latency and uses a 1Rx4 Hynix chip organisation. The 288-pin module is designed for systems requiring error-correcting code and registered buffering.

Upgrade from non-ECC or unbuffered memory

This module replaces standard unbuffered or non-ECC DIMMs when data integrity and signal stability are required. The jump is worth it for workloads that cannot tolerate silent data corruption or for motherboards that mandate registered modules. It steps up from lower-capacity registered sticks to a single 16GB rank.

Fits DDR4 RDIMM slots in compatible servers

The 288-pin form factor installs directly into DDR4 RDIMM slots on qualified Hynix-compatible server or workstation motherboards. Registered buffering reduces electrical load on the memory controller, freeing headroom for additional modules. No heat spreader is fitted, so airflow across the PCB is unimpeded.

Punti di forza

  • 16GB DDR4 ECC RDIMM protects server data integrity
  • Registered 1Rx4 design stabilises heavy workloads
  • CL15 latency at 2133 MT/s speeds response
  • 2V operation reduces power draw per module
  • 288-pin form factor fits compatible DDR4 slots

Caratteristiche tecniche

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2133MHZ ECC RDIMM Registered Server Memory
Part NumberMR17000-614K1
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL15
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2133MHZ PC4-17000 1Rx4 1.2V CL15 288-PIN ECC RDIMM Registered Server Memory

Domande su questo articolo

Does the 288-pin DDR4 RDIMM fit a standard server DIMM slot?

Yes, the module uses the 288-pin DDR4 RDIMM form factor that matches standard registered server DIMM slots.

What is the correct orientation step when seating the 1Rx4 registered module?

Align the off-centre notch on the 288-pin edge connector with the slot key, press straight down until both retention clips click, and verify the module sits evenly.

Will the 1.2 V CL15 ECC RDIMM require any firmware update or battery replacement over time?

No firmware or battery maintenance is needed; the DRAM operates at 1.2 V with on-die ECC, and the module has no onboard power source.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.