SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00500837BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR4 2133 ECC RDIMM CL15 1.2V 288-pin memory upgrade
A 16 GB DDR4 2133 ECC registered DIMM running at 1.2 V with CL15 latency for server memory upgrades
- Capacity16GB
- SpeedDDR4 2133 (PC4 17000)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 ECC RDIMM protects server data integrity
- Registered 1Rx4 design stabilises heavy workloads
- CL15 latency at 2133 MT/s speeds response
- 2V operation reduces power draw per module
- 288-pin form factor fits compatible DDR4 slots
16GB DDR4 ECC Registered Module
This 16GB DDR4 2133MHz ECC RDIMM provides registered memory for server and workstation platforms. It operates at 1.2V with a CL15 latency and uses a 1Rx4 Hynix chip organisation. The 288-pin module is designed for systems requiring error-correcting code and registered buffering.
Upgrade from non-ECC or unbuffered memory
This module replaces standard unbuffered or non-ECC DIMMs when data integrity and signal stability are required. The jump is worth it for workloads that cannot tolerate silent data corruption or for motherboards that mandate registered modules. It steps up from lower-capacity registered sticks to a single 16GB rank.
Fits DDR4 RDIMM slots in compatible servers
The 288-pin form factor installs directly into DDR4 RDIMM slots on qualified Hynix-compatible server or workstation motherboards. Registered buffering reduces electrical load on the memory controller, freeing headroom for additional modules. No heat spreader is fitted, so airflow across the PCB is unimpeded.
주요 특징
- 16GB DDR4 ECC RDIMM protects server data integrity
- Registered 1Rx4 design stabilises heavy workloads
- CL15 latency at 2133 MT/s speeds response
- 2V operation reduces power draw per module
- 288-pin form factor fits compatible DDR4 slots
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Server/Workstaion Compatible Series Memory |
| Model | Hynix DDR4 2133MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR17000-614K1 |
| Capacity | 16GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Hynix |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2133MHZ PC4-17000 1Rx4 1.2V CL15 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
Does the 288-pin DDR4 RDIMM fit a standard server DIMM slot?
Yes, the module uses the 288-pin DDR4 RDIMM form factor that matches standard registered server DIMM slots.
What is the correct orientation step when seating the 1Rx4 registered module?
Align the off-centre notch on the 288-pin edge connector with the slot key, press straight down until both retention clips click, and verify the module sits evenly.
Will the 1.2 V CL15 ECC RDIMM require any firmware update or battery replacement over time?
No firmware or battery maintenance is needed; the DRAM operates at 1.2 V with on-die ECC, and the module has no onboard power source.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
