NEMIX RAM DDR5 5600MHz 32GB (2x16GB) ECC UDIMM CL46 1.1V 288-pin memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR5 ECC UD…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
A 64 GB kit of four 16 GB DDR5 5600 CL46 unbuffered UDIMM modules built for Supermicro workstations
Capacity 64GB 4X16GB
This NEMIX RAM kit provides 64 GB of DDR5 memory in a matched set of four 16 GB UDIMM modules. It is built for Supermicro desktop workstations such as the SYS-531AD-I and C9Z790-CG motherboards. The kit suits professionals who need validated capacity for memory-intensive workloads on these specific platforms.
Rated at 5600 MT/s with CL46 timings and a low 1.10 V operating voltage, the modules are stress-tested under load to maintain stability during extended compute sessions. The unbuffered, non-ECC design relies on the memory controller for error handling, so data integrity depends on the host platform rather than on-module correction.
Each 288-pin module seats in standard DDR5 DIMM slots without a heat spreader, keeping the profile low for tight clearances. Because the kit is system-specific, compatibility issues usually arise only when the motherboard or BIOS does not match the validated Supermicro models listed. Builders using unsupported boards may encounter training failures or reduced speeds.
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 5600MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN NON-ECC Unbuffered UDIMM KIT |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Each module operates at 1.10 V, the standard DDR5 voltage, so power draw stays at the JEDEC baseline for 5600 MT/s UDIMMs.
You need a board with four DDR5 UDIMM slots and a chipset that supports 5600 MT/s non-ECC memory, such as the Z790 platform used in the SYS-531AD-I.
Mixing ranks or latencies can prevent the board from training at 5600 MT/s; for guaranteed stability use all four modules from this kit together.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?