저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green DDR5 UDIMM sticks, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade

SKU CH-AV5R-4Q6KC

A 64 GB kit of four 16 GB DDR5 5600 CL46 unbuffered UDIMM modules built for Supermicro workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 4X16GB

  • 64 GB total capacity in a four-module kit
  • DDR5 5600 MT/s speed rated at PC5-44800
  • Low 1.10 V operating voltage for efficient power use
  • CL46 CAS latency with 1Rx8 single-rank organisation
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG workstations

System-Specific 64 GB DDR5 Kit

This NEMIX RAM kit provides 64 GB of DDR5 memory in a matched set of four 16 GB UDIMM modules. It is built for Supermicro desktop workstations such as the SYS-531AD-I and C9Z790-CG motherboards. The kit suits professionals who need validated capacity for memory-intensive workloads on these specific platforms.

Sustained-Load Behaviour at 5600 MT/s

Rated at 5600 MT/s with CL46 timings and a low 1.10 V operating voltage, the modules are stress-tested under load to maintain stability during extended compute sessions. The unbuffered, non-ECC design relies on the memory controller for error handling, so data integrity depends on the host platform rather than on-module correction.

Straightforward UDIMM Installation

Each 288-pin module seats in standard DDR5 DIMM slots without a heat spreader, keeping the profile low for tight clearances. Because the kit is system-specific, compatibility issues usually arise only when the motherboard or BIOS does not match the validated Supermicro models listed. Builders using unsupported boards may encounter training failures or reduced speeds.

주요 특징

  • 64 GB total capacity in a four-module kit
  • DDR5 5600 MT/s speed rated at PC5-44800
  • Low 1.10 V operating voltage for efficient power use
  • CL46 CAS latency with 1Rx8 single-rank organisation
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG workstations

사양

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN NON-ECC Unbuffered UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How much power does the 1.1 V DDR5 kit draw when the system runs continuously?

Each module operates at 1.10 V, the standard DDR5 voltage, so power draw stays at the JEDEC baseline for 5600 MT/s UDIMMs.

What motherboard slot and chipset must I already have for this 288-pin kit to work?

You need a board with four DDR5 UDIMM slots and a chipset that supports 5600 MT/s non-ECC memory, such as the Z790 platform used in the SYS-531AD-I.

Will the CL46 1Rx8 modules work alongside older DDR5 DIMMs I already own?

Mixing ranks or latencies can prevent the board from training at 5600 MT/s; for guaranteed stability use all four modules from this kit together.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.