暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 UDIMM sticks, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade

SKU CH-AV5R-4Q6KC

A 64 GB kit of four 16 GB DDR5 5600 CL46 unbuffered UDIMM modules built for Supermicro workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 4X16GB

  • 64 GB total capacity in a four-module kit
  • DDR5 5600 MT/s speed rated at PC5-44800
  • Low 1.10 V operating voltage for efficient power use
  • CL46 CAS latency with 1Rx8 single-rank organisation
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG workstations

System-Specific 64 GB DDR5 Kit

This NEMIX RAM kit provides 64 GB of DDR5 memory in a matched set of four 16 GB UDIMM modules. It is built for Supermicro desktop workstations such as the SYS-531AD-I and C9Z790-CG motherboards. The kit suits professionals who need validated capacity for memory-intensive workloads on these specific platforms.

Sustained-Load Behaviour at 5600 MT/s

Rated at 5600 MT/s with CL46 timings and a low 1.10 V operating voltage, the modules are stress-tested under load to maintain stability during extended compute sessions. The unbuffered, non-ECC design relies on the memory controller for error handling, so data integrity depends on the host platform rather than on-module correction.

Straightforward UDIMM Installation

Each 288-pin module seats in standard DDR5 DIMM slots without a heat spreader, keeping the profile low for tight clearances. Because the kit is system-specific, compatibility issues usually arise only when the motherboard or BIOS does not match the validated Supermicro models listed. Builders using unsupported boards may encounter training failures or reduced speeds.

特長

  • 64 GB total capacity in a four-module kit
  • DDR5 5600 MT/s speed rated at PC5-44800
  • Low 1.10 V operating voltage for efficient power use
  • CL46 CAS latency with 1Rx8 single-rank organisation
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG workstations

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN NON-ECC Unbuffered UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the 1.1 V DDR5 kit draw when the system runs continuously?

Each module operates at 1.10 V, the standard DDR5 voltage, so power draw stays at the JEDEC baseline for 5600 MT/s UDIMMs.

What motherboard slot and chipset must I already have for this 288-pin kit to work?

You need a board with four DDR5 UDIMM slots and a chipset that supports 5600 MT/s non-ECC memory, such as the Z790 platform used in the SYS-531AD-I.

Will the CL46 1Rx8 modules work alongside older DDR5 DIMMs I already own?

Mixing ranks or latencies can prevent the board from training at 5600 MT/s; for guaranteed stability use all four modules from this kit together.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。