暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 UDIMM sticks, no heat spreaders, 64 GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5200 CL38 SYS-531AD-I C9Z790-CG memory upgrade

SKU CH-AKPC-6QMRG

A 64 GB kit of two 32 GB DDR5 5200 CL38 unbuffered UDIMMs validated for Supermicro SYS-531AD-I C9Z790-CG workstations

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 2X32GB

  • 64 GB kit doubles system capacity for heavy workloads
  • DDR5 5200 speed moves data faster than previous DDR generations
  • CL38 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG workstations

Targeted System Compatibility

This 64GB kit is built for the SuperMicro SYS-531AD-I C9Z790-CG workstation. It delivers two 32GB DDR5 modules rated at 5200 MT/s with a CAS latency of 38. The modules run at 1.10 volts and use a 288-pin UDIMM form factor. They are unbuffered, non-ECC and use a 2Rx8 organisation.

Workstation Upgrade Focus

The kit suits IT professionals and enthusiasts upgrading the named SuperMicro platform. It is not for buyers who need ECC error correction or registered modules for a server board. It is also not for builders whose motherboard requires a heat spreader or a different pin count. Compatibility is validated only for the specified system.

Sustained Load Behaviour

Modules are stress tested under load before shipping to confirm stability during extended workloads. The 1.10 volt operation helps manage thermal output during continuous use. Without a heat spreader, airflow across the PCB becomes the primary cooling path in a fully populated chassis.

特長

  • 64 GB kit doubles system capacity for heavy workloads
  • DDR5 5200 speed moves data faster than previous DDR generations
  • CL38 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG workstations

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Which motherboard slots and voltage must my board provide for this 288-pin DDR5 kit to operate at 1.10 V?

Your motherboard needs four DDR5 UDIMM slots running at 1.1 V; the kit installs in any two slots as a matched pair.

Will the 2Rx8 organisation of these modules work alongside any existing single-rank DDR5 DIMMs I keep in the other two slots?

Yes, dual-rank 2Rx8 modules can share a channel with single-rank sticks provided the board supports mixed-rank populations at 5200 MT/s.

After installation, how do I confirm the kit is running at the rated 5200 speed and CL38 latency?

Enter the firmware setup or run a system-information utility and check that the memory frequency reports 5200 MT/s with CAS latency 38.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。