نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green DDR5 UDIMM sticks, no heat spreaders, 64 GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5200 CL38 SYS-531AD-I C9Z790-CG memory upgrade

SKU CH-AKPC-6QMRG

A 64 GB kit of two 32 GB DDR5 5200 CL38 unbuffered UDIMMs validated for Supermicro SYS-531AD-I C9Z790-CG workstations

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 2X32GB

  • 64 GB kit doubles system capacity for heavy workloads
  • DDR5 5200 speed moves data faster than previous DDR generations
  • CL38 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG workstations

Targeted System Compatibility

This 64GB kit is built for the SuperMicro SYS-531AD-I C9Z790-CG workstation. It delivers two 32GB DDR5 modules rated at 5200 MT/s with a CAS latency of 38. The modules run at 1.10 volts and use a 288-pin UDIMM form factor. They are unbuffered, non-ECC and use a 2Rx8 organisation.

Workstation Upgrade Focus

The kit suits IT professionals and enthusiasts upgrading the named SuperMicro platform. It is not for buyers who need ECC error correction or registered modules for a server board. It is also not for builders whose motherboard requires a heat spreader or a different pin count. Compatibility is validated only for the specified system.

Sustained Load Behaviour

Modules are stress tested under load before shipping to confirm stability during extended workloads. The 1.10 volt operation helps manage thermal output during continuous use. Without a heat spreader, airflow across the PCB becomes the primary cooling path in a fully populated chassis.

أبرز المميزات

  • 64 GB kit doubles system capacity for heavy workloads
  • DDR5 5200 speed moves data faster than previous DDR generations
  • CL38 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG workstations

المواصفات

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Which motherboard slots and voltage must my board provide for this 288-pin DDR5 kit to operate at 1.10 V?

Your motherboard needs four DDR5 UDIMM slots running at 1.1 V; the kit installs in any two slots as a matched pair.

Will the 2Rx8 organisation of these modules work alongside any existing single-rank DDR5 DIMMs I keep in the other two slots?

Yes, dual-rank 2Rx8 modules can share a channel with single-rank sticks provided the board supports mixed-rank populations at 5200 MT/s.

After installation, how do I confirm the kit is running at the rated 5200 speed and CL38 latency?

Enter the firmware setup or run a system-information utility and check that the memory frequency reports 5200 MT/s with CAS latency 38.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.