我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 UDIMM sticks, no heat spreaders, 64 GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5200 CL38 SYS-531AD-I C9Z790-CG memory upgrade

SKU CH-AKPC-6QMRG

A 64 GB kit of two 32 GB DDR5 5200 CL38 unbuffered UDIMMs validated for Supermicro SYS-531AD-I C9Z790-CG workstations

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 2X32GB

  • 64 GB kit doubles system capacity for heavy workloads
  • DDR5 5200 speed moves data faster than previous DDR generations
  • CL38 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG workstations

Targeted System Compatibility

This 64GB kit is built for the SuperMicro SYS-531AD-I C9Z790-CG workstation. It delivers two 32GB DDR5 modules rated at 5200 MT/s with a CAS latency of 38. The modules run at 1.10 volts and use a 288-pin UDIMM form factor. They are unbuffered, non-ECC and use a 2Rx8 organisation.

Workstation Upgrade Focus

The kit suits IT professionals and enthusiasts upgrading the named SuperMicro platform. It is not for buyers who need ECC error correction or registered modules for a server board. It is also not for builders whose motherboard requires a heat spreader or a different pin count. Compatibility is validated only for the specified system.

Sustained Load Behaviour

Modules are stress tested under load before shipping to confirm stability during extended workloads. The 1.10 volt operation helps manage thermal output during continuous use. Without a heat spreader, airflow across the PCB becomes the primary cooling path in a fully populated chassis.

商品特色

  • 64 GB kit doubles system capacity for heavy workloads
  • DDR5 5200 speed moves data faster than previous DDR generations
  • CL38 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • Validated for Supermicro SYS-531AD-I and C9Z790-CG workstations

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Which motherboard slots and voltage must my board provide for this 288-pin DDR5 kit to operate at 1.10 V?

Your motherboard needs four DDR5 UDIMM slots running at 1.1 V; the kit installs in any two slots as a matched pair.

Will the 2Rx8 organisation of these modules work alongside any existing single-rank DDR5 DIMMs I keep in the other two slots?

Yes, dual-rank 2Rx8 modules can share a channel with single-rank sticks provided the board supports mixed-rank populations at 5200 MT/s.

After installation, how do I confirm the kit is running at the rated 5200 speed and CL38 latency?

Enter the firmware setup or run a system-information utility and check that the memory frequency reports 5200 MT/s with CAS latency 38.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。