暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (2×32GB) DDR5 4800 CL40 1.1V 2Rx8 UDIMM SuperMicro memory upgrade

SKU CH-D7V2-V3D5Q

A 64 GB dual-channel DDR5 kit with two 32 GB UDIMM modules running at 4800 MT/s CL40 and 1.1 V, validated for Supermicro workstations

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 2X32GB

  • 64GB dual-channel capacity speeds up heavy workloads
  • DDR5 4800 MT/s bandwidth feeds modern Supermicro workstations
  • CL40 latency at 1.1 V balances responsiveness with efficiency
  • 2Rx8 288-pin UDIMM layout fits supported Supermicro boards
  • Major OEM Samsung Micron Hynix chips ensure reliable operation

64GB DDR5 Kit for SuperMicro Workstations

This 64GB kit contains two 32GB DDR5 4800 UDIMM modules built for SuperMicro desktop and SuperWorkstation systems including the SYS-531AD-I and C9Z790-CG. It targets IT professionals and enthusiasts who need validated, non-ECC memory for compatible platforms.

Non-ECC Unbuffered Design for Direct Compatibility

The modules are non-ECC and unbuffered, matching the electrical requirements of the specified SuperMicro motherboards without registered or error-correcting overhead. Major OEM chips from Samsung, Micron or Hynix are used and each kit is stress tested under load before shipping.

Low-Profile 288-Pin UDIMM Build

A 1.10V operating voltage and CL40 latency define the electrical profile, while the 2Rx8 organisation fits the 288-pin DDR5 slot standard. No heat spreader is fitted, so clearance is minimal and installation follows the motherboard manual in minutes.

特長

  • 64GB dual-channel capacity speeds up heavy workloads
  • DDR5 4800 MT/s bandwidth feeds modern Supermicro workstations
  • CL40 latency at 1.1 V balances responsiveness with efficiency
  • 2Rx8 288-pin UDIMM layout fits supported Supermicro boards
  • Major OEM Samsung Micron Hynix chips ensure reliable operation

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 2Rx8 DDR5 modules need any firmware updates or re-seating after the first year of continuous operation?

No firmware updates are required for these UDIMMs; they are validated at 4800 MT/s and 1.10 V and retain their JEDEC profile for the life of the module.

Does the CL40 latency at 4800 MT/s become the bottleneck before the 64 GB capacity is fully utilised in sustained workloads?

At 4800 MT/s the CL40 timing sets the access latency floor; once the working set exceeds cache, that latency is the first limit reached under sustained load.

With no heat spreader on the 288-pin sticks, how hot do they run and how much power do they draw during all-day operation?

Operating at 1.10 V, each 32 GB module draws minimal power and runs within JEDEC thermal limits without a spreader, so temperatures stay low even under continuous use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。