OWC 32GB (2x16GB) DDR3 1600 CL11 2Rx4 1.5V ECC Registered RDIMM memory upgrade
- 32GB (2 x 16GB)
- 240-Pin DDR3 ECC RD…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
ECC registered DDR3 kit adds 32 GB across two 16 GB modules at 1600 MHz CL11 for Supermicro SuperWorkstation 5037A and 7047A systems
Capacity 32GB (2 x 16GB)
This 32GB kit contains two 16GB DDR3 1600 CL11 registered DIMMs built for Supermicro SuperWorkstation 5037A and 7047A systems. It targets administrators who need error-correcting memory in validated workstation or server platforms. The modules will not work in standard desktop computers and cannot be mixed with unbuffered memory.
Each stick uses a 240-pin DDR3 interface at 1.5V with a 2Rx4 organisation and no heat spreader. The registered design places a buffer on the command bus to reduce electrical load on the memory controller, which is required by the supported Supermicro platforms. Installers must populate slots according to the system manual because registered DIMMs have specific population rules.
The kit ships as a matched pair of 16GB modules so the workstation can run in dual-channel mode without the user sourcing individual sticks. OWC tests every module in-house to JEDEC and RoHS standards and backs the kit with a limited lifetime warranty plus free technical support. The part number 1R6D32R4032P replaces Supermicro MEMDR316LHL01ER16 and MEMDR316LSL01ER16.
| Brand | OWC |
|---|---|
| Part Number | 1R6D32R4032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperWorkstation 5037A Series Supermicro SuperWorkstation 7047A Series |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The modules operate at 1600 MHz with PC3-12800 bandwidth and a CAS latency of CL11 at the standard 1.5 V JEDEC voltage.
Each 16 GB module uses a 240-pin DDR3 DIMM form factor and fits the registered DIMM slots on Supermicro SuperWorkstation 5037A and 7047A series boards.
Power down, open the chassis, align the notch on each 240-pin RDIMM with the slot key, press firmly until both latches click, then verify the system detects 32 GB; the frequent error is mixing these registered modules with unbuffered DIMMs, which prevents boot.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?