OWC 32GB (2x16GB) DDR3 1600 CL11 2Rx4 1.5V ECC Registered RDIMM memory upgrade
- 32GB (2 x 16GB)
- 240-Pin DDR3 ECC RD…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OWC
ECC registered DDR3 kit adds 32 GB across two 16 GB modules at 1600 MHz CL11 for Supermicro SuperWorkstation 5037A and 7047A systems
Capacity 32GB (2 x 16GB)
This 32GB kit contains two 16GB DDR3 1600 CL11 registered DIMMs built for Supermicro SuperWorkstation 5037A and 7047A systems. It targets administrators who need error-correcting memory in validated workstation or server platforms. The modules will not work in standard desktop computers and cannot be mixed with unbuffered memory.
Each stick uses a 240-pin DDR3 interface at 1.5V with a 2Rx4 organisation and no heat spreader. The registered design places a buffer on the command bus to reduce electrical load on the memory controller, which is required by the supported Supermicro platforms. Installers must populate slots according to the system manual because registered DIMMs have specific population rules.
The kit ships as a matched pair of 16GB modules so the workstation can run in dual-channel mode without the user sourcing individual sticks. OWC tests every module in-house to JEDEC and RoHS standards and backs the kit with a limited lifetime warranty plus free technical support. The part number 1R6D32R4032P replaces Supermicro MEMDR316LHL01ER16 and MEMDR316LSL01ER16.
| Brand | OWC |
|---|---|
| Part Number | 1R6D32R4032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperWorkstation 5037A Series Supermicro SuperWorkstation 7047A Series |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The modules operate at 1600 MHz with PC3-12800 bandwidth and a CAS latency of CL11 at the standard 1.5 V JEDEC voltage.
Each 16 GB module uses a 240-pin DDR3 DIMM form factor and fits the registered DIMM slots on Supermicro SuperWorkstation 5037A and 7047A series boards.
Power down, open the chassis, align the notch on each 240-pin RDIMM with the slot key, press firmly until both latches click, then verify the system detects 32 GB; the frequent error is mixing these registered modules with unbuffered DIMMs, which prevents boot.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?