We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with gold edge connectors and black memory chips

OWC

OWC 32GB (2x16GB) DDR3 1600 CL11 ECC RDIMM 1R6D32R4032P memory upgrade

SKU CH-33R1-NFN8Z

ECC registered DDR3 kit adds 32 GB across two 16 GB modules at 1600 MHz CL11 for Supermicro SuperWorkstation 5037A and 7047A systems

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands workstation memory capacity
  • DDR3 1600 CL11 matches Supermicro 5037A and 7047A specifications
  • 5 V registered modules install without voltage changes
  • 240-pin RDIMM form factor fits approved SuperWorkstation slots

32GB ECC Registered DDR3 Kit

This 32GB kit contains two 16GB DDR3 1600 CL11 registered DIMMs built for Supermicro SuperWorkstation 5037A and 7047A systems. It targets administrators who need error-correcting memory in validated workstation or server platforms. The modules will not work in standard desktop computers and cannot be mixed with unbuffered memory.

240-Pin 1.5V Registered Modules

Each stick uses a 240-pin DDR3 interface at 1.5V with a 2Rx4 organisation and no heat spreader. The registered design places a buffer on the command bus to reduce electrical load on the memory controller, which is required by the supported Supermicro platforms. Installers must populate slots according to the system manual because registered DIMMs have specific population rules.

Two-Module Matched Pair

The kit ships as a matched pair of 16GB modules so the workstation can run in dual-channel mode without the user sourcing individual sticks. OWC tests every module in-house to JEDEC and RoHS standards and backs the kit with a limited lifetime warranty plus free technical support. The part number 1R6D32R4032P replaces Supermicro MEMDR316LHL01ER16 and MEMDR316LSL01ER16.

Highlights

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands workstation memory capacity
  • DDR3 1600 CL11 matches Supermicro 5037A and 7047A specifications
  • 5 V registered modules install without voltage changes
  • 240-pin RDIMM form factor fits approved SuperWorkstation slots

Specifications

BrandOWC
Part Number1R6D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperWorkstation 5037A Series
Supermicro SuperWorkstation 7047A Series

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What speed and latency does this DDR3 1600 CL11 kit run at in a Supermicro SuperWorkstation 5037A?

The modules operate at 1600 MHz with PC3-12800 bandwidth and a CAS latency of CL11 at the standard 1.5 V JEDEC voltage.

What physical slot and form factor do these 240-pin RDIMMs require?

Each 16 GB module uses a 240-pin DDR3 DIMM form factor and fits the registered DIMM slots on Supermicro SuperWorkstation 5037A and 7047A series boards.

How do I install this 2 x 16 GB ECC registered kit and what is the common mistake?

Power down, open the chassis, align the notch on each 240-pin RDIMM with the slot key, press firmly until both latches click, then verify the system detects 32 GB; the frequent error is mixing these registered modules with unbuffered DIMMs, which prevents boot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.