Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Silver 4U rackmount chassis with front drive bays and rear redundant power supplies

Supermicro

Supermicro AS -4124GS-TNR 4U barebone server

SKU CH-JCBD-GC0YX MPN AS -4124GS-TNR

4U rackmount barebone for dual AMD EPYC 7003/7002 processors with 32 DDR4 slots, 24 hot-swap 2.5" bays and 2000W redundant power

  • Form Factor4U Rackmount
  • CPU TypeDual AMD EPYC 7003/7002 Series Processors (The latest AMD EP
  • CPU SocketSocket SP3
  • Installed CPUNo CPU Installed
  • Max Processors2
  • Memory Slots32 x 288Pin * Minimum 4 DIMMs per CPU required with EPYC 700
  • Dual AMD EPYC 7003 and 7002 processors deliver high multi-thread performance
  • 32 DDR4 3200 slots support up to 8 TB registered ECC memory
  • 9 PCI-E 4.0 x16 full-height slots enable dense GPU or accelerator deployments
  • Up to 24 hot-swap 2.5 inch SAS or SATA bays provide massive local storage
  • 2000 W redundant power supplies with PMBus ensure continuous operation

Dual-socket EPYC 7003/7002 platform

The Supermicro AS -4124GS-TNR is a 4U rackmount barebone server built for dual AMD EPYC 7003 and 7002 series processors. It requires two CPUs; single-socket operation is not supported. The board provides 32 DDR4 3200 registered ECC DIMM slots and demands at least four modules per processor. Integrated Aspeed AST2500 graphics handle basic display output.

32 slots scale to 8 TB with DDR4 3200

Memory capacity reaches 8 TB when all 32 slots are populated with supported DDR4 3200 registered ECC modules. The architecture enforces a minimum of four DIMMs per CPU for EPYC 7003 series chips, so partial fills below that threshold will not post. Builders needing more than 8 TB of system memory cannot be accommodated by this platform.

PCIe 4.0 x16 slots and 24 hot-swap bays

Expansion offers nine PCIe 4.0 x16 full-height full-length slots, rising to ten when NVMe devices are not installed. Storage density tops out at 24 hot-swap 2.5-inch SAS or SATA drive bays. Workloads requiring more than ten full-length PCIe 4.0 cards or more than 24 front-accessible drives exceed the chassis limits.

Punti di forza

  • Dual AMD EPYC 7003 and 7002 processors deliver high multi-thread performance
  • 32 DDR4 3200 slots support up to 8 TB registered ECC memory
  • 9 PCI-E 4.0 x16 full-height slots enable dense GPU or accelerator deployments
  • Up to 24 hot-swap 2.5 inch SAS or SATA bays provide massive local storage
  • 2000 W redundant power supplies with PMBus ensure continuous operation

Caratteristiche tecniche

BrandSUPERMICRO
ModelAS -4124GS-TNR
Form Factor4U Rackmount
CPU TypeDual AMD EPYC 7003/7002 Series Processors
(The latest AMD EPYC 7003 Series Processor with AMD 3D V-Cache Technology requires BIOS version 2.3 or newer)*
* Supports 2 CPUs only - single socket not supported
CPU SocketSocket SP3
Installed CPUNo CPU Installed
Max Processors2
Memory Slots32 x 288Pin
* Minimum 4 DIMMs per CPU required with EPYC 7003 Series processors
Installed Memory SizeNo Memory Installed
Max Memory Supported8TB
Memory Type SupportedDDR4 3200
ECC SupportedYes
RegisteredYes
Installed HDDNo Storage Installed
GPU/VPUAspeed AST2500
PCI Express9 PCI-E 4.0 x16 (FHFL) slots
or 10 PCI-E 4.0 x16 (FHFL) slots without NVMe devices
Hot-Swap BaysUp to 24x 2.5" SAS/SATA drive bays
COM1 COM port (header)
VGA1
Rear USB2 x USB 3.0
RJ452 RJ45 GbE LAN ports (rear)
1 RJ45 Dedicated IPMI LAN port
Max. Power2000W Redundant Power Supplies with PMBus
Dimensions7.00" x 17.20" x 29.00"
Weight65.50 lbs.
Peso di spedizione20.55 kg
Dimensioni del pacco1041 × 686 × 675 mm

Domande su questo articolo

Will my existing DDR4-3200 ECC registered DIMMs work in the 32 x 288Pin slots with dual EPYC 7003 CPUs?

Yes, the board accepts DDR4 3200 ECC registered modules; you must populate at least four DIMMs per CPU for the 7003 series to initialise.

How do I confirm the Aspeed AST2500 BMC and VGA output are functioning after the first power-on?

Connect a monitor to the rear VGA port and the dedicated IPMI LAN port; the AST2500 will display the BMC login prompt and POST codes if the 2000 W redundant supplies are delivering power.

Which drive carriers and caddies come with the 24-bay 2.5" chassis, and what must I source separately?

The barebone includes the hot-swap backplane and bay frames; you still need to purchase 2.5" SAS/SATA drives and any NVMe U.2/U.3 drives plus their cables for the PCI-E 4.0 slots.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.