STARTECH ADJDINKIT 2U Adjustable DIN Rail Kit 19in server accessory
- Rail Kit
- U Height: 2U Frame…
Supermicro
4U rackmount barebone for dual AMD EPYC 7003/7002 processors with 32 DDR4 slots, 24 hot-swap 2.5" bays and 2000W redundant power
The Supermicro AS -4124GS-TNR is a 4U rackmount barebone server built for dual AMD EPYC 7003 and 7002 series processors. It requires two CPUs; single-socket operation is not supported. The board provides 32 DDR4 3200 registered ECC DIMM slots and demands at least four modules per processor. Integrated Aspeed AST2500 graphics handle basic display output.
Memory capacity reaches 8 TB when all 32 slots are populated with supported DDR4 3200 registered ECC modules. The architecture enforces a minimum of four DIMMs per CPU for EPYC 7003 series chips, so partial fills below that threshold will not post. Builders needing more than 8 TB of system memory cannot be accommodated by this platform.
Expansion offers nine PCIe 4.0 x16 full-height full-length slots, rising to ten when NVMe devices are not installed. Storage density tops out at 24 hot-swap 2.5-inch SAS or SATA drive bays. Workloads requiring more than ten full-length PCIe 4.0 cards or more than 24 front-accessible drives exceed the chassis limits.
| Brand | SUPERMICRO |
|---|---|
| Model | AS -4124GS-TNR |
| Form Factor | 4U Rackmount |
| CPU Type | Dual AMD EPYC 7003/7002 Series Processors (The latest AMD EPYC 7003 Series Processor with AMD 3D V-Cache Technology requires BIOS version 2.3 or newer)* * Supports 2 CPUs only - single socket not supported |
| CPU Socket | Socket SP3 |
| Installed CPU | No CPU Installed |
| Max Processors | 2 |
| Memory Slots | 32 x 288Pin * Minimum 4 DIMMs per CPU required with EPYC 7003 Series processors |
| Installed Memory Size | No Memory Installed |
| Max Memory Supported | 8TB |
| Memory Type Supported | DDR4 3200 |
| ECC Supported | Yes |
| Registered | Yes |
| Installed HDD | No Storage Installed |
| GPU/VPU | Aspeed AST2500 |
| PCI Express | 9 PCI-E 4.0 x16 (FHFL) slots or 10 PCI-E 4.0 x16 (FHFL) slots without NVMe devices |
| Hot-Swap Bays | Up to 24x 2.5" SAS/SATA drive bays |
| COM | 1 COM port (header) |
| VGA | 1 |
| Rear USB | 2 x USB 3.0 |
| RJ45 | 2 RJ45 GbE LAN ports (rear) 1 RJ45 Dedicated IPMI LAN port |
| Max. Power | 2000W Redundant Power Supplies with PMBus |
| Dimensions | 7.00" x 17.20" x 29.00" |
| Weight | 65.50 lbs. |
| 配送重量 | 20.55 kg |
| 梱包サイズ | 1041 × 686 × 675 mm |
Yes, the board accepts DDR4 3200 ECC registered modules; you must populate at least four DIMMs per CPU for the 7003 series to initialise.
Connect a monitor to the rear VGA port and the dedicated IPMI LAN port; the AST2500 will display the BMC login prompt and POST codes if the 2000 W redundant supplies are delivering power.
The barebone includes the hot-swap backplane and bay frames; you still need to purchase 2.5" SAS/SATA drives and any NVMe U.2/U.3 drives plus their cables for the PCI-E 4.0 slots.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?