Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Thin black carbon-fibre thermal pad 51 by 68 by 0.2 mm

Thermal Grizzly

Thermal Grizzly Carbonaut 51x68x0.2mm thermal pad

SKU CH-N3S9-AZ5PK

A reusable carbon-fibre thermal pad measuring 51 x 68 x 0.2 mm that replaces mid-range pastes with high conductivity and no dry-out

  • Specifications1 piece
  • FeaturesThe Carbonaut high-tech carbon pads are excellent as an alte
  • High thermal conductivity from carbon fibre structure
  • Reusable pad replaces mid-range thermal pastes
  • Elastic surface fills microscopic gaps under low pressure
  • Consistent long-term performance without drying out
  • Pre-cut 51 x 68 x 0.2 mm size for easy installation

Thermal Grizzly Carbonaut 51x68x0.2mm pad

The Thermal Grizzly Carbonaut pad is a carbon-fibre thermal interface designed as an alternative to mid-range thermal pastes. Its elastic polymer surface conforms to microscopic gaps between components and heatsinks. The pad is reusable and maintains consistent thermal transfer without drying out. It suits builders who prefer a clean, non-messy installation over traditional grease.

Thermals noise and power impact

Carbonaut delivers high thermal conductivity at very low contact pressure, so heat moves efficiently from the die to the cooler. Because it does not dry out, performance stays stable over years without reapplication. The pad itself adds no noise and draws no power, leaving system acoustics and power consumption unchanged. It is electrically conductive, so care is needed to avoid bridging nearby components.

Replaces thermal paste when to upgrade

This pad replaces thermal paste on CPUs or GPUs where a 51 by 68 millimetre, 0.2 millimetre thick sheet fits the die and surrounding area. It is worth the jump when you want a reusable, mess-free solution that does not degrade over time. It is not for buyers who need a non-conductive interface or a thinner pad for tighter clearances.

Punti di forza

  • High thermal conductivity from carbon fibre structure
  • Reusable pad replaces mid-range thermal pastes
  • Elastic surface fills microscopic gaps under low pressure
  • Consistent long-term performance without drying out
  • Pre-cut 51 x 68 x 0.2 mm size for easy installation

Caratteristiche tecniche

BrandThermal Grizzly
ModelTG-CA-51-68-02-R
Part NumberTG-CA-51-68-02-R
Specifications1 piece
FeaturesThe Carbonaut high-tech carbon pads are excellent as an alternative for thermal conductive pastes. They are reusable and have a very elastic and adaptable surface with very high thermal conductivity.

Domande su questo articolo

How do I install the 51x68x0.2mm Carbonaut pad without bending it?

Remove the protective film, align the 51 by 68 millimetre pad on the die, then lower the cooler straight down; the 0.2 millimetre thickness is fragile, so avoid sliding it into place.

Will the Carbonaut pad need replacement after a few years?

The pad does not dry out and is reusable, so it maintains consistent thermal transfer without scheduled replacement unless physically damaged.

What happens if I use the electrically conductive Carbonaut pad near exposed SMD components?

Because Carbonaut is electrically conductive, it can short adjacent surface-mount parts; keep the pad strictly on the die and clean any overhang immediately.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.