Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Thin black carbon-fibre thermal pad 51 by 68 by 0.2 mm

Thermal Grizzly

Thermal Grizzly Carbonaut 51x68x0.2mm thermal pad

SKU CH-N3S9-AZ5PK

A reusable carbon-fibre thermal pad measuring 51 x 68 x 0.2 mm that replaces mid-range pastes with high conductivity and no dry-out

  • Specifications1 piece
  • FeaturesThe Carbonaut high-tech carbon pads are excellent as an alte
  • High thermal conductivity from carbon fibre structure
  • Reusable pad replaces mid-range thermal pastes
  • Elastic surface fills microscopic gaps under low pressure
  • Consistent long-term performance without drying out
  • Pre-cut 51 x 68 x 0.2 mm size for easy installation

Thermal Grizzly Carbonaut 51x68x0.2mm pad

The Thermal Grizzly Carbonaut pad is a carbon-fibre thermal interface designed as an alternative to mid-range thermal pastes. Its elastic polymer surface conforms to microscopic gaps between components and heatsinks. The pad is reusable and maintains consistent thermal transfer without drying out. It suits builders who prefer a clean, non-messy installation over traditional grease.

Thermals noise and power impact

Carbonaut delivers high thermal conductivity at very low contact pressure, so heat moves efficiently from the die to the cooler. Because it does not dry out, performance stays stable over years without reapplication. The pad itself adds no noise and draws no power, leaving system acoustics and power consumption unchanged. It is electrically conductive, so care is needed to avoid bridging nearby components.

Replaces thermal paste when to upgrade

This pad replaces thermal paste on CPUs or GPUs where a 51 by 68 millimetre, 0.2 millimetre thick sheet fits the die and surrounding area. It is worth the jump when you want a reusable, mess-free solution that does not degrade over time. It is not for buyers who need a non-conductive interface or a thinner pad for tighter clearances.

Přednosti

  • High thermal conductivity from carbon fibre structure
  • Reusable pad replaces mid-range thermal pastes
  • Elastic surface fills microscopic gaps under low pressure
  • Consistent long-term performance without drying out
  • Pre-cut 51 x 68 x 0.2 mm size for easy installation

Specifikace

BrandThermal Grizzly
ModelTG-CA-51-68-02-R
Part NumberTG-CA-51-68-02-R
Specifications1 piece
FeaturesThe Carbonaut high-tech carbon pads are excellent as an alternative for thermal conductive pastes. They are reusable and have a very elastic and adaptable surface with very high thermal conductivity.

Otázky k tomuto produktu

How do I install the 51x68x0.2mm Carbonaut pad without bending it?

Remove the protective film, align the 51 by 68 millimetre pad on the die, then lower the cooler straight down; the 0.2 millimetre thickness is fragile, so avoid sliding it into place.

Will the Carbonaut pad need replacement after a few years?

The pad does not dry out and is reusable, so it maintains consistent thermal transfer without scheduled replacement unless physically damaged.

What happens if I use the electrically conductive Carbonaut pad near exposed SMD components?

Because Carbonaut is electrically conductive, it can short adjacent surface-mount parts; keep the pad strictly on the die and clean any overhang immediately.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.