暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Thin black carbon-fibre thermal pad 51 by 68 by 0.2 mm

Thermal Grizzly

Thermal Grizzly Carbonaut 51x68x0.2mm thermal pad

SKU CH-N3S9-AZ5PK

A reusable carbon-fibre thermal pad measuring 51 x 68 x 0.2 mm that replaces mid-range pastes with high conductivity and no dry-out

  • Specifications1 piece
  • FeaturesThe Carbonaut high-tech carbon pads are excellent as an alte
  • High thermal conductivity from carbon fibre structure
  • Reusable pad replaces mid-range thermal pastes
  • Elastic surface fills microscopic gaps under low pressure
  • Consistent long-term performance without drying out
  • Pre-cut 51 x 68 x 0.2 mm size for easy installation

Thermal Grizzly Carbonaut 51x68x0.2mm pad

The Thermal Grizzly Carbonaut pad is a carbon-fibre thermal interface designed as an alternative to mid-range thermal pastes. Its elastic polymer surface conforms to microscopic gaps between components and heatsinks. The pad is reusable and maintains consistent thermal transfer without drying out. It suits builders who prefer a clean, non-messy installation over traditional grease.

Thermals noise and power impact

Carbonaut delivers high thermal conductivity at very low contact pressure, so heat moves efficiently from the die to the cooler. Because it does not dry out, performance stays stable over years without reapplication. The pad itself adds no noise and draws no power, leaving system acoustics and power consumption unchanged. It is electrically conductive, so care is needed to avoid bridging nearby components.

Replaces thermal paste when to upgrade

This pad replaces thermal paste on CPUs or GPUs where a 51 by 68 millimetre, 0.2 millimetre thick sheet fits the die and surrounding area. It is worth the jump when you want a reusable, mess-free solution that does not degrade over time. It is not for buyers who need a non-conductive interface or a thinner pad for tighter clearances.

特長

  • High thermal conductivity from carbon fibre structure
  • Reusable pad replaces mid-range thermal pastes
  • Elastic surface fills microscopic gaps under low pressure
  • Consistent long-term performance without drying out
  • Pre-cut 51 x 68 x 0.2 mm size for easy installation

仕様

BrandThermal Grizzly
ModelTG-CA-51-68-02-R
Part NumberTG-CA-51-68-02-R
Specifications1 piece
FeaturesThe Carbonaut high-tech carbon pads are excellent as an alternative for thermal conductive pastes. They are reusable and have a very elastic and adaptable surface with very high thermal conductivity.

この商品に関する質問

How do I install the 51x68x0.2mm Carbonaut pad without bending it?

Remove the protective film, align the 51 by 68 millimetre pad on the die, then lower the cooler straight down; the 0.2 millimetre thickness is fragile, so avoid sliding it into place.

Will the Carbonaut pad need replacement after a few years?

The pad does not dry out and is reusable, so it maintains consistent thermal transfer without scheduled replacement unless physically damaged.

What happens if I use the electrically conductive Carbonaut pad near exposed SMD components?

Because Carbonaut is electrically conductive, it can short adjacent surface-mount parts; keep the pad strictly on the die and clean any overhang immediately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。