Thermaltake PS-STP-0750FNFAPU-1 750W SFX power supply
- Black
- ATX 12V 3.1
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Thermaltake
An SFX form-factor power supply delivering 850 W with 80 PLUS Platinum efficiency, full modular cables and a native 12V-2x6 connector for ATX 3.1 builds
Options SFX 850W ATX 3.1 Platinum
This SFX-form-factor unit delivers 850 W of continuous power and meets the ATX 12V 3.1 specification. It is built for compact systems that still demand high output, such as small-form-factor gaming rigs or workstation builds. Full modular cabling keeps the interior tidy and improves airflow in tight chassis. The 90 mm fluid-dynamic-bearing fan runs quietly under typical loads.
The supply is 80 PLUS Platinum certified at 115 V input, so it wastes less energy and generates less heat across the load range. A native 12V-2x6 connector rated for 450 W feeds modern graphics cards without adapters. Two 6+2-pin PCIe cables provide additional GPU power options. The single +12 V rail design simplifies power distribution for high-draw components.
At 125 mm long the unit fits standard SFX mounting brackets and leaves room for cable routing behind the motherboard tray. Full modularity means only the cables the build actually needs are installed, freeing space for storage drives or custom loops. Active PFC and a 100-240 V input range allow worldwide use without a voltage switch. Protection circuits include OVP, UVP, OCP, OPP, SCP and OTP.
| Brand | Thermaltake |
|---|---|
| Series | Toughpower SFX |
| Model | SFX-0850AH8FLP |
| Part Number | PS-STP-0850FNFAPU-1 |
| Color | Black |
| Type | ATX 12V 3.1 |
| Maximum Power | 850 W |
| Fans | 9cm FDB Fan |
| PFC | Active |
| PCI-Express Connector | 2 x 6+2-Pin |
| Max PSU Length | 125 mm |
| Modular | Full Modular |
| Power Good Signal | 100-150 msec |
| Efficiency | Meet 80 PLUS® Platinum at 115Vac input. |
| Energy-Efficient | 80 PLUS PLATINUM Certified |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 15A - 8A |
| MTBF | >100,000 Hours |
| Approvals | CE/UKCA/FCC/ICES/CB/TUV/cTUVus/LVD/CCC/BSMI/S-MARK/EAC/RCM |
| Hold-up Time | > 17msec at 80% load |
| Dimensions | 125mm(W)x63.5mm(H)x103.8mm(D) |
| Peso di spedizione | 2.09 kg |
| Dimensioni del pacco | 254 × 178 × 114 mm |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The power supply measures 125 mm in length, so it will not fit in a case limited to 100 mm.
Yes, a native 12V-2x6 connector rated for 450 W is included and supports ATX 12V 3.1.
The unit uses a 90 mm FDB fan, which is the standard size for SFX form factor builds.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?