Thermaltake PS-STP-0750FNFAPU-1 750W SFX power supply
- Black
- ATX 12V 3.1
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Thermaltake
An SFX form-factor power supply delivering 850 W with 80 PLUS Platinum efficiency, full modular cables and a native 12V-2x6 connector for ATX 3.1 builds
Options SFX 850W ATX 3.1 Platinum
This SFX-form-factor unit delivers 850 W of continuous power and meets the ATX 12V 3.1 specification. It is built for compact systems that still demand high output, such as small-form-factor gaming rigs or workstation builds. Full modular cabling keeps the interior tidy and improves airflow in tight chassis. The 90 mm fluid-dynamic-bearing fan runs quietly under typical loads.
The supply is 80 PLUS Platinum certified at 115 V input, so it wastes less energy and generates less heat across the load range. A native 12V-2x6 connector rated for 450 W feeds modern graphics cards without adapters. Two 6+2-pin PCIe cables provide additional GPU power options. The single +12 V rail design simplifies power distribution for high-draw components.
At 125 mm long the unit fits standard SFX mounting brackets and leaves room for cable routing behind the motherboard tray. Full modularity means only the cables the build actually needs are installed, freeing space for storage drives or custom loops. Active PFC and a 100-240 V input range allow worldwide use without a voltage switch. Protection circuits include OVP, UVP, OCP, OPP, SCP and OTP.
| Brand | Thermaltake |
|---|---|
| Series | Toughpower SFX |
| Model | SFX-0850AH8FLP |
| Part Number | PS-STP-0850FNFAPU-1 |
| Color | Black |
| Type | ATX 12V 3.1 |
| Maximum Power | 850 W |
| Fans | 9cm FDB Fan |
| PFC | Active |
| PCI-Express Connector | 2 x 6+2-Pin |
| Max PSU Length | 125 mm |
| Modular | Full Modular |
| Power Good Signal | 100-150 msec |
| Efficiency | Meet 80 PLUS® Platinum at 115Vac input. |
| Energy-Efficient | 80 PLUS PLATINUM Certified |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 15A - 8A |
| MTBF | >100,000 Hours |
| Approvals | CE/UKCA/FCC/ICES/CB/TUV/cTUVus/LVD/CCC/BSMI/S-MARK/EAC/RCM |
| Hold-up Time | > 17msec at 80% load |
| Dimensions | 125mm(W)x63.5mm(H)x103.8mm(D) |
| น้ำหนักในการจัดส่ง | 2.09 kg |
| ขนาดบรรจุภัณฑ์ | 254 × 178 × 114 mm |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The power supply measures 125 mm in length, so it will not fit in a case limited to 100 mm.
Yes, a native 12V-2x6 connector rated for 450 W is included and supports ATX 12V 3.1.
The unit uses a 90 mm FDB fan, which is the standard size for SFX form factor builds.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม