Thermaltake PS-STP-0750FNFAPU-1 750W SFX power supply
- Black
- ATX 12V 3.1
Thermaltake
An SFX form-factor power supply delivering 850 W with 80 PLUS Platinum efficiency, full modular cables and a native 12V-2x6 connector for ATX 3.1 builds
Options SFX 850W ATX 3.1 Platinum
This SFX-form-factor unit delivers 850 W of continuous power and meets the ATX 12V 3.1 specification. It is built for compact systems that still demand high output, such as small-form-factor gaming rigs or workstation builds. Full modular cabling keeps the interior tidy and improves airflow in tight chassis. The 90 mm fluid-dynamic-bearing fan runs quietly under typical loads.
The supply is 80 PLUS Platinum certified at 115 V input, so it wastes less energy and generates less heat across the load range. A native 12V-2x6 connector rated for 450 W feeds modern graphics cards without adapters. Two 6+2-pin PCIe cables provide additional GPU power options. The single +12 V rail design simplifies power distribution for high-draw components.
At 125 mm long the unit fits standard SFX mounting brackets and leaves room for cable routing behind the motherboard tray. Full modularity means only the cables the build actually needs are installed, freeing space for storage drives or custom loops. Active PFC and a 100-240 V input range allow worldwide use without a voltage switch. Protection circuits include OVP, UVP, OCP, OPP, SCP and OTP.
| Brand | Thermaltake |
|---|---|
| Series | Toughpower SFX |
| Model | SFX-0850AH8FLP |
| Part Number | PS-STP-0850FNFAPU-1 |
| Color | Black |
| Type | ATX 12V 3.1 |
| Maximum Power | 850 W |
| Fans | 9cm FDB Fan |
| PFC | Active |
| PCI-Express Connector | 2 x 6+2-Pin |
| Max PSU Length | 125 mm |
| Modular | Full Modular |
| Power Good Signal | 100-150 msec |
| Efficiency | Meet 80 PLUS® Platinum at 115Vac input. |
| Energy-Efficient | 80 PLUS PLATINUM Certified |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 15A - 8A |
| MTBF | >100,000 Hours |
| Approvals | CE/UKCA/FCC/ICES/CB/TUV/cTUVus/LVD/CCC/BSMI/S-MARK/EAC/RCM |
| Hold-up Time | > 17msec at 80% load |
| Dimensions | 125mm(W)x63.5mm(H)x103.8mm(D) |
| 配送重量 | 2.09 kg |
| 梱包サイズ | 254 × 178 × 114 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The power supply measures 125 mm in length, so it will not fit in a case limited to 100 mm.
Yes, a native 12V-2x6 connector rated for 450 W is included and supports ATX 12V 3.1.
The unit uses a 90 mm FDB fan, which is the standard size for SFX form factor builds.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?