Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 120mm square case fan with 3-pin power connector

Zyvpee

Zyvpee 4710NL-04W-B39 120mm 3-pin case fan

SKU CH-1EV1-X3M9A

A 120 mm ball-bearing case fan with a 3-pin connector for CPU cooler compatibility

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for longer service life
  • 12 V 0.32 A draws minimal power
  • 120 mm × 25 mm fits standard mounts
  • Three-pin connector enables speed reporting
  • Non-LED black frame keeps build subtle

Zyvpee 120mm Ball-Bearing Case Fan

The Zyvpee 4710NL-04W-B39 is a 120 by 25 millimetre DC fan built for CPU cooler and chassis airflow duties. It runs on 12 volt power and draws 0.32 amp through a standard three-pin connector. The black frame carries no lighting, so it suits builds that prefer a neutral look.

Replacing Sleeved or Worn 3-Pin Fans

Swap this unit in when an existing 120 millimetre fan develops bearing noise or fails to spin at full speed. The ball-bearing design lasts longer than sleeve alternatives, making the change worthwhile for systems that run continuously or sit in warm enclosures. It fits any mount spaced for 120 millimetre holes.

Steady Airflow Under Continuous Load

Ball bearings maintain consistent rotation when the fan runs for extended periods at 12 volts. The three-pin header reports speed to the motherboard so the board can adjust voltage in response to temperature. Without PWM control the fan settles at a fixed voltage level rather than ramping sharply.

Punti di forza

  • Ball bearing for longer service life
  • 12 V 0.32 A draws minimal power
  • 120 mm × 25 mm fits standard mounts
  • Three-pin connector enables speed reporting
  • Non-LED black frame keeps build subtle

Caratteristiche tecniche

BrandZyvpee
Series4710NL-04W-B39
Model4710NL-04W-B39
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesPower Case Fan
Dimensions120*25MM

Domande su questo articolo

What case clearance does the 120*25MM frame need?

The 120*25MM square frame fits any standard 120 mm mounting hole pattern with at least 25 mm depth behind the panel.

How do I connect the 3-pin plug so the motherboard reads speed correctly?

Align the keyed 3-pin connector with the motherboard CPU_FAN or SYS_FAN header; the third wire carries the tachometer signal for RPM monitoring.

When should the ball-bearing assembly be replaced?

Replace the fan if bearing noise appears or RPM drops below spec; ball bearings typically run for years but are not user-serviceable.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.