暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee 4710NL-04W-B39 120mm 3-pin case fan

SKU CH-1EV1-X3M9A

A 120 mm ball-bearing case fan with a 3-pin connector for CPU cooler compatibility

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for longer service life
  • 12 V 0.32 A draws minimal power
  • 120 mm × 25 mm fits standard mounts
  • Three-pin connector enables speed reporting
  • Non-LED black frame keeps build subtle

Zyvpee 120mm Ball-Bearing Case Fan

The Zyvpee 4710NL-04W-B39 is a 120 by 25 millimetre DC fan built for CPU cooler and chassis airflow duties. It runs on 12 volt power and draws 0.32 amp through a standard three-pin connector. The black frame carries no lighting, so it suits builds that prefer a neutral look.

Replacing Sleeved or Worn 3-Pin Fans

Swap this unit in when an existing 120 millimetre fan develops bearing noise or fails to spin at full speed. The ball-bearing design lasts longer than sleeve alternatives, making the change worthwhile for systems that run continuously or sit in warm enclosures. It fits any mount spaced for 120 millimetre holes.

Steady Airflow Under Continuous Load

Ball bearings maintain consistent rotation when the fan runs for extended periods at 12 volts. The three-pin header reports speed to the motherboard so the board can adjust voltage in response to temperature. Without PWM control the fan settles at a fixed voltage level rather than ramping sharply.

特長

  • Ball bearing for longer service life
  • 12 V 0.32 A draws minimal power
  • 120 mm × 25 mm fits standard mounts
  • Three-pin connector enables speed reporting
  • Non-LED black frame keeps build subtle

仕様

BrandZyvpee
Series4710NL-04W-B39
Model4710NL-04W-B39
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesPower Case Fan
Dimensions120*25MM

この商品に関する質問

What case clearance does the 120*25MM frame need?

The 120*25MM square frame fits any standard 120 mm mounting hole pattern with at least 25 mm depth behind the panel.

How do I connect the 3-pin plug so the motherboard reads speed correctly?

Align the keyed 3-pin connector with the motherboard CPU_FAN or SYS_FAN header; the third wire carries the tachometer signal for RPM monitoring.

When should the ball-bearing assembly be replaced?

Replace the fan if bearing noise appears or RPM drops below spec; ball bearings typically run for years but are not user-serviceable.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。