Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 80mm square case fan 15mm thick ball bearing non LED two wire

Zyvpee

Zyvpee AD0812HB-D70 80mm 12V ball bearing case fan

SKU CH-742Q-PKYBD

80 mm case fan with ball bearing running at 2500-2999 RPM and 25-30 dBA on 12 V

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM2500-2999 RPM
  • Noise Level25 - 30 dBA
  • Power Connector2 Pin
  • Ball bearing design reduces wear for longer service life
  • 12 V DC operation draws only 0.18 A for efficient power use
  • 80 × 80 × 15 mm footprint fits standard 80 mm case mounts
  • 25–30 dBA output keeps system noise low
  • 2500–2999 RPM speed range delivers strong airflow for cooling

Compact 80 mm 12 V ball-bearing fan

The Zyvpee AD0812HB-D70 is an 80 mm square case fan designed for 12 V DC systems. It draws 0.18 A and connects through a two-pin power lead. The unit suits builders who need a slim 15 mm profile for tight chassis or side-panel mounts.

Airflow range and practical limits

The motor spins between 2500 and 2999 RPM to move air through compact enclosures. It handles typical component cooling and moderate heat loads in small-form-factor builds. The fan will not satisfy high-static-pressure radiators or multi-GPU setups that demand greater volumetric flow.

Thermals, noise and power draw in normal use

Ball bearings keep friction low while the fan runs at 25 to 30 dBA under load. Power consumption stays at 0.18 A on the 12 V rail, adding minimal heat to the loop. The non-LED black frame blends into dark interiors without extra light spill.

Punti di forza

  • Ball bearing design reduces wear for longer service life
  • 12 V DC operation draws only 0.18 A for efficient power use
  • 80 × 80 × 15 mm footprint fits standard 80 mm case mounts
  • 25–30 dBA output keeps system noise low
  • 2500–2999 RPM speed range delivers strong airflow for cooling

Caratteristiche tecniche

SeriesAD0812HB-D70
ModelAD0812HB-D70
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM2500-2999 RPM
Noise Level25 - 30 dBA
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*15mm

Domande su questo articolo

Will the 2-pin 12 V 0.18 A connector on this 80 mm fan work with the 3-pin headers on my older motherboard?

The fan uses a 2-pin power connector that fits standard 3-pin headers; the third pin for speed reporting is simply unused, so the fan will run at full 2500-2999 RPM.

How can I confirm the ball-bearing fan is spinning at the rated 2500-2999 RPM after installation?

Listen for a steady airflow hum in the 25-30 dBA range and check the hardware-monitoring section of your BIOS or a fan-control utility for a reading between 2500 and 2999 RPM.

Does the AD0812HB-D70 come with mounting screws or do I need to supply my own for an 80 mm case opening?

The package contains only the 80x80x15 mm fan with its 2-wire lead; mounting screws are not included and must be sourced separately.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.