Zyvpee
Zyvpee AD0812HB-D70 80mm 12V ball bearing case fan
80 mm case fan with ball bearing running at 2500-2999 RPM and 25-30 dBA on 12 V
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- RPM2500-2999 RPM
- Noise Level25 - 30 dBA
- Power Connector2 Pin
- Ball bearing design reduces wear for longer service life
- 12 V DC operation draws only 0.18 A for efficient power use
- 80 × 80 × 15 mm footprint fits standard 80 mm case mounts
- 25–30 dBA output keeps system noise low
- 2500–2999 RPM speed range delivers strong airflow for cooling
Compact 80 mm 12 V ball-bearing fan
The Zyvpee AD0812HB-D70 is an 80 mm square case fan designed for 12 V DC systems. It draws 0.18 A and connects through a two-pin power lead. The unit suits builders who need a slim 15 mm profile for tight chassis or side-panel mounts.
Airflow range and practical limits
The motor spins between 2500 and 2999 RPM to move air through compact enclosures. It handles typical component cooling and moderate heat loads in small-form-factor builds. The fan will not satisfy high-static-pressure radiators or multi-GPU setups that demand greater volumetric flow.
Thermals, noise and power draw in normal use
Ball bearings keep friction low while the fan runs at 25 to 30 dBA under load. Power consumption stays at 0.18 A on the 12 V rail, adding minimal heat to the loop. The non-LED black frame blends into dark interiors without extra light spill.
주요 특징
- Ball bearing design reduces wear for longer service life
- 12 V DC operation draws only 0.18 A for efficient power use
- 80 × 80 × 15 mm footprint fits standard 80 mm case mounts
- 25–30 dBA output keeps system noise low
- 2500–2999 RPM speed range delivers strong airflow for cooling
사양
| Series | AD0812HB-D70 |
|---|---|
| Model | AD0812HB-D70 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| RPM | 2500-2999 RPM |
| Noise Level | 25 - 30 dBA |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 80*80*15mm |
이 상품에 대한 질문
Will the 2-pin 12 V 0.18 A connector on this 80 mm fan work with the 3-pin headers on my older motherboard?
The fan uses a 2-pin power connector that fits standard 3-pin headers; the third pin for speed reporting is simply unused, so the fan will run at full 2500-2999 RPM.
How can I confirm the ball-bearing fan is spinning at the rated 2500-2999 RPM after installation?
Listen for a steady airflow hum in the 25-30 dBA range and check the hardware-monitoring section of your BIOS or a fan-control utility for a reading between 2500 and 2999 RPM.
Does the AD0812HB-D70 come with mounting screws or do I need to supply my own for an 80 mm case opening?
The package contains only the 80x80x15 mm fan with its 2-wire lead; mounting screws are not included and must be sourced separately.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001049BTC
재고 있음