暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80mm square case fan 15mm thick ball bearing non LED two wire

Zyvpee

Zyvpee AD0812HB-D70 80mm 12V ball bearing case fan

SKU CH-742Q-PKYBD

80 mm case fan with ball bearing running at 2500-2999 RPM and 25-30 dBA on 12 V

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM2500-2999 RPM
  • Noise Level25 - 30 dBA
  • Power Connector2 Pin
  • Ball bearing design reduces wear for longer service life
  • 12 V DC operation draws only 0.18 A for efficient power use
  • 80 × 80 × 15 mm footprint fits standard 80 mm case mounts
  • 25–30 dBA output keeps system noise low
  • 2500–2999 RPM speed range delivers strong airflow for cooling

Compact 80 mm 12 V ball-bearing fan

The Zyvpee AD0812HB-D70 is an 80 mm square case fan designed for 12 V DC systems. It draws 0.18 A and connects through a two-pin power lead. The unit suits builders who need a slim 15 mm profile for tight chassis or side-panel mounts.

Airflow range and practical limits

The motor spins between 2500 and 2999 RPM to move air through compact enclosures. It handles typical component cooling and moderate heat loads in small-form-factor builds. The fan will not satisfy high-static-pressure radiators or multi-GPU setups that demand greater volumetric flow.

Thermals, noise and power draw in normal use

Ball bearings keep friction low while the fan runs at 25 to 30 dBA under load. Power consumption stays at 0.18 A on the 12 V rail, adding minimal heat to the loop. The non-LED black frame blends into dark interiors without extra light spill.

特長

  • Ball bearing design reduces wear for longer service life
  • 12 V DC operation draws only 0.18 A for efficient power use
  • 80 × 80 × 15 mm footprint fits standard 80 mm case mounts
  • 25–30 dBA output keeps system noise low
  • 2500–2999 RPM speed range delivers strong airflow for cooling

仕様

SeriesAD0812HB-D70
ModelAD0812HB-D70
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM2500-2999 RPM
Noise Level25 - 30 dBA
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*15mm

この商品に関する質問

Will the 2-pin 12 V 0.18 A connector on this 80 mm fan work with the 3-pin headers on my older motherboard?

The fan uses a 2-pin power connector that fits standard 3-pin headers; the third pin for speed reporting is simply unused, so the fan will run at full 2500-2999 RPM.

How can I confirm the ball-bearing fan is spinning at the rated 2500-2999 RPM after installation?

Listen for a steady airflow hum in the 25-30 dBA range and check the hardware-monitoring section of your BIOS or a fan-control utility for a reading between 2500 and 2999 RPM.

Does the AD0812HB-D70 come with mounting screws or do I need to supply my own for an 80 mm case opening?

The package contains only the 80x80x15 mm fan with its 2-wire lead; mounting screws are not included and must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。