Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 80mm square case fan 38mm thick four-wire ball bearing 12V 3.6A

Zyvpee

Zyvpee DBPD0838B2U 80x38mm 12V 3.6A 4-wire ball bearing case fan

SKU CH-6GF0-48A6B

An 80 mm by 38 mm dual-ball-bearing case fan spinning above 7000 RPM and pushing over 80 CFM from a 12 V four-wire connection

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • RPM>7000 RPM
  • Air Flow>80 CFM
  • Power Connector4 Wires
  • High airflow over 80 CFM for strong cooling
  • Dual ball bearing rated for long service life
  • 7000 RPM maximum speed delivers high static pressure
  • 4-wire PWM connector enables precise speed control
  • Compact 80 by 38 mm frame fits tight chassis

80 mm 4-wire ball-bearing case fan

The Zyvpee DBPD0838B2U is an 80 mm axial fan built for case ventilation. It runs on 12 V DC and draws 3.6 A through a standard 4-wire PWM connector. The double ball bearing is rated for continuous operation in server or workstation chassis. Black frame and blades with no LED lighting keep the appearance neutral.

Sustained airflow above 80 CFM at over 7000 RPM

At full speed the fan moves more than 80 CFM while spinning above 7000 RPM. The 38 mm thick frame houses a motor designed to maintain that output without throttling during extended loads. The 4-wire interface allows the motherboard to modulate speed in response to temperature curves. Performance stays consistent in restricted airflow paths typical of dense drive bays or GPU cages.

Ball bearing runs quietly at moderate PWM duty

Under typical PWM curves the double ball bearing produces a smooth broadband sound without the rattle of sleeve units. Power draw scales with RPM, so idle speeds keep consumption well below the 3.6 A maximum. The 12 V supply rail sees minimal ripple because the fan controller is integrated. No LED circuitry means one less heat source inside the housing.

Punti di forza

  • High airflow over 80 CFM for strong cooling
  • Dual ball bearing rated for long service life
  • 7000 RPM maximum speed delivers high static pressure
  • 4-wire PWM connector enables precise speed control
  • Compact 80 by 38 mm frame fits tight chassis

Caratteristiche tecniche

SeriesDBPD0838B2U
ModelDBPD0838B2U
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
RPM>7000 RPM
Air Flow>80 CFM
Power Connector4 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*38mm

Domande su questo articolo

How loud and hot does the 80x38mm fan get when it runs above 7000 RPM continuously?

At over 7000 RPM the 12 V motor draws 3.6 A, so expect noticeable airflow noise and measurable heat output during all-day operation.

What must my case or controller provide to run the 4-wire 12 V 3.6 A connector?

A standard 4-pin PWM header rated for at least 12 V and 3.6 A is required; the fan will not start on a 3-pin or lower-current header.

Will the 80x38mm frame and >80 CFM output fit and cool a legacy 80 mm mount without adapter brackets?

Yes, the 80x80x38 mm dimensions match the classic 80 mm mounting pattern, and the high airflow works with older heatsinks designed for that spacing.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.