我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black 80mm square case fan 38mm thick four-wire ball bearing 12V 3.6A

Zyvpee

Zyvpee DBPD0838B2U 80x38mm 12V 3.6A 4-wire ball bearing case fan

SKU CH-6GF0-48A6B

An 80 mm by 38 mm dual-ball-bearing case fan spinning above 7000 RPM and pushing over 80 CFM from a 12 V four-wire connection

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • RPM>7000 RPM
  • Air Flow>80 CFM
  • Power Connector4 Wires
  • High airflow over 80 CFM for strong cooling
  • Dual ball bearing rated for long service life
  • 7000 RPM maximum speed delivers high static pressure
  • 4-wire PWM connector enables precise speed control
  • Compact 80 by 38 mm frame fits tight chassis

80 mm 4-wire ball-bearing case fan

The Zyvpee DBPD0838B2U is an 80 mm axial fan built for case ventilation. It runs on 12 V DC and draws 3.6 A through a standard 4-wire PWM connector. The double ball bearing is rated for continuous operation in server or workstation chassis. Black frame and blades with no LED lighting keep the appearance neutral.

Sustained airflow above 80 CFM at over 7000 RPM

At full speed the fan moves more than 80 CFM while spinning above 7000 RPM. The 38 mm thick frame houses a motor designed to maintain that output without throttling during extended loads. The 4-wire interface allows the motherboard to modulate speed in response to temperature curves. Performance stays consistent in restricted airflow paths typical of dense drive bays or GPU cages.

Ball bearing runs quietly at moderate PWM duty

Under typical PWM curves the double ball bearing produces a smooth broadband sound without the rattle of sleeve units. Power draw scales with RPM, so idle speeds keep consumption well below the 3.6 A maximum. The 12 V supply rail sees minimal ripple because the fan controller is integrated. No LED circuitry means one less heat source inside the housing.

商品特色

  • High airflow over 80 CFM for strong cooling
  • Dual ball bearing rated for long service life
  • 7000 RPM maximum speed delivers high static pressure
  • 4-wire PWM connector enables precise speed control
  • Compact 80 by 38 mm frame fits tight chassis

商品規格

SeriesDBPD0838B2U
ModelDBPD0838B2U
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
RPM>7000 RPM
Air Flow>80 CFM
Power Connector4 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*38mm

商品問答

How loud and hot does the 80x38mm fan get when it runs above 7000 RPM continuously?

At over 7000 RPM the 12 V motor draws 3.6 A, so expect noticeable airflow noise and measurable heat output during all-day operation.

What must my case or controller provide to run the 4-wire 12 V 3.6 A connector?

A standard 4-pin PWM header rated for at least 12 V and 3.6 A is required; the fan will not start on a 3-pin or lower-current header.

Will the 80x38mm frame and >80 CFM output fit and cool a legacy 80 mm mount without adapter brackets?

Yes, the 80x80x38 mm dimensions match the classic 80 mm mounting pattern, and the high airflow works with older heatsinks designed for that spacing.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。