暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, 288 gold pins, no heat spreader

A-Tech

A-Tech 128GB DDR4 2666 ECC LRDIMM 2S4Rx4 288-Pin server RAM

SKU CH-KD7N-0K3FW

128 GB DDR4-2666 ECC LRDIMM module with 2S4Rx4 octal-rank 3DS/TSV organisation, CL19 latency and 1.2 V operation for server and workstation platforms

  • Capacity128GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Capacity 128GB

  • 128 GB capacity in a single module for maximum density
  • DDR4-2666 speed with CL19 latency for responsive server workloads
  • ECC Load Reduced DIMM corrects errors and reduces electrical load on the memory bus
  • 20 V standard DDR4 voltage keeps power draw in check
  • 288-pin 2S4Rx4 3DS/TSV octal-rank design fits compatible server and workstation slots

Server Memory for Demanding Workloads

This 128GB DDR4 LRDIMM module is built for servers and workstations that need high memory density and error correction. The Load Reduced design with 2S4Rx4 organisation and 3DS/TSV stacking lets a single 288-pin slot deliver octal-rank capacity. It is not compatible with desktop or laptop platforms.

Thermals and Power in Normal Use

Operating at 1.2V standard DDR4 voltage with CL19 latency, the module runs without a heat spreader. Power draw scales with the 2666 MHz data rate and the 128GB capacity in sustained server workloads. Acoustic output depends on chassis airflow rather than the module itself.

Build Integration and System Fit

The 288-pin DDR4 form factor requires a server or workstation motherboard qualified for LRDIMM memory and the 2S4Rx4 rank structure. ECC and Load Reduced buffering free the memory controller from electrical load, allowing higher total system capacity. Verify your platform's supported memory specifications before installation.

特長

  • 128 GB capacity in a single module for maximum density
  • DDR4-2666 speed with CL19 latency for responsive server workloads
  • ECC Load Reduced DIMM corrects errors and reduces electrical load on the memory bus
  • 20 V standard DDR4 voltage keeps power draw in check
  • 288-pin 2S4Rx4 3DS/TSV octal-rank design fits compatible server and workstation slots

仕様

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 128GB 2S4Rx4 PC4-2666V-L
Part NumberNE-SS-0708
Capacity128GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank2S4Rx4 (8Rx4 3DS/TSV)
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install this 288-Pin DDR4 LRDIMM and what is the common mistake?

Align the notch on the 288-Pin DDR4 LRDIMM with the slot key, press firmly until both retention clips click, and verify the module is fully seated; the frequent error is stopping when resistance is first felt instead of pushing until the clips engage.

What maintenance or replacement will this 128GB ECC LRDIMM need over time?

The module has no heat spreader and no moving parts, so no routine maintenance is required; replacement is only necessary if a memory test reports uncorrectable ECC errors or the system fails to recognise the 128GB capacity.

What limit appears first when this CL19 2666 MHz LRDIMM runs sustained workloads?

The first bottleneck is the DDR4 2666 MT/s data rate at CL19 latency, which caps sustained memory bandwidth before the 1.2V power envelope or thermal limits become a constraint.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。