暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
A green 288-pin DDR4 LRDIMM module with black memory chips, no heat spreader

A-Tech

A-Tech 128GB DDR4 2933 ECC LRDIMM 2S4Rx4 288-Pin Server RAM

SKU CH-P8B7-Z8HB7

128 GB DDR4 2933 ECC LRDIMM module with 2S4Rx4 octal-rank 3DS chips, CL21 latency and 1.2 V operation

  • Capacity128GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 128GB

  • 128 GB capacity expands server memory headroom for large datasets
  • DDR4 2933 MHz speed accelerates data throughput in compatible systems
  • ECC load-reduced design corrects errors while lowering electrical load on the memory bus
  • Octal-rank 3DS stacking fits maximum density into a single 288-pin module
  • 2 V operation matches standard DDR4 voltage for efficient power use

Single 128GB module for DDR4 servers

This single 128GB module is built for DDR4 servers and workstations that require ECC load-reduced memory. It will not work in desktop or laptop systems. The octal-rank 3DS design lets a single DIMM deliver very high capacity for memory-intensive server workloads.

Sustained load with ECC load-reduced design

The load-reduced architecture reduces electrical loading on the memory bus, helping the module maintain stability during continuous server workloads. ECC corrects single-bit errors in real time, protecting data integrity across long-running tasks. CL21 latency at 2933 MHz supports consistent throughput under sustained demand.

Install in validated server slots only

Installation follows standard 288-pin DDR4 DIMM seating, but the system must explicitly support 128GB ECC LRDIMM modules with 2S4Rx4 3DS organisation. Compatibility fails when the platform does not qualify this rank and density combination. Consult the system manual for correct channel population rules before fitting the module.

特長

  • 128 GB capacity expands server memory headroom for large datasets
  • DDR4 2933 MHz speed accelerates data throughput in compatible systems
  • ECC load-reduced design corrects errors while lowering electrical load on the memory bus
  • Octal-rank 3DS stacking fits maximum density into a single 288-pin module
  • 2 V operation matches standard DDR4 voltage for efficient power use

仕様

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 128GB 2S4Rx4 PC4-2933Y-L
Part NumberAT128G1D4D2933LO4N12V
Capacity128GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank2S4Rx4 (8Rx4 3DS/TSV)
Multi-channel KitSingle Module
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the 128GB DDR4 2933 module draw at its 1.20V rating?

The module operates at the standard DDR4 voltage of 1.20V. Actual power draw depends on server workload and memory controller utilisation, but the low-voltage design helps limit heat output in dense configurations.

What server memory slots and channel population rules must I check before installing this 288-pin LRDIMM?

Your server must support DDR4 ECC Load Reduced DIMMs with 2S4Rx4 octal-rank 3DS/TSV organisation. Consult the system manual for qualified vendor lists, maximum capacity per slot and required channel population order.

Can I mix this 2933 MT/s octal-rank LRDIMM with existing lower-rank DDR4 RDIMMs in the same server?

Mixing Load Reduced and standard Registered DIMMs is not supported. All populated slots must use identical LRDIMM rank structure and speed; otherwise the memory controller will disable the mismatched channels.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。