A-Tech 128GB DDR4 2666 ECC RDIMM 2S4Rx4 3DS server RAM
- 128GB
- DDR4 2666 (PC4 2130…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
128 GB DDR4 2933 ECC LRDIMM module with 2S4Rx4 octal-rank 3DS chips, CL21 latency and 1.2 V operation
Capacity 128GB
This single 128GB module is built for DDR4 servers and workstations that require ECC load-reduced memory. It will not work in desktop or laptop systems. The octal-rank 3DS design lets a single DIMM deliver very high capacity for memory-intensive server workloads.
The load-reduced architecture reduces electrical loading on the memory bus, helping the module maintain stability during continuous server workloads. ECC corrects single-bit errors in real time, protecting data integrity across long-running tasks. CL21 latency at 2933 MHz supports consistent throughput under sustained demand.
Installation follows standard 288-pin DDR4 DIMM seating, but the system must explicitly support 128GB ECC LRDIMM modules with 2S4Rx4 3DS organisation. Compatibility fails when the platform does not qualify this rank and density combination. Consult the system manual for correct channel population rules before fitting the module.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 128GB 2S4Rx4 PC4-2933Y-L |
| Part Number | AT128G1D4D2933LO4N12V |
| Capacity | 128GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2S4Rx4 (8Rx4 3DS/TSV) |
| Multi-channel Kit | Single Module |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module operates at the standard DDR4 voltage of 1.20V. Actual power draw depends on server workload and memory controller utilisation, but the low-voltage design helps limit heat output in dense configurations.
Your server must support DDR4 ECC Load Reduced DIMMs with 2S4Rx4 octal-rank 3DS/TSV organisation. Consult the system manual for qualified vendor lists, maximum capacity per slot and required channel population order.
Mixing Load Reduced and standard Registered DIMMs is not supported. All populated slots must use identical LRDIMM rank structure and speed; otherwise the memory controller will disable the mismatched channels.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
No language matches that.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟