A-Tech 128GB DDR4 2666 ECC RDIMM 2S4Rx4 3DS server RAM
- 128GB
- DDR4 2666 (PC4 2130…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
128 GB DDR4 2933 ECC LRDIMM module with 2S4Rx4 octal-rank 3DS chips, CL21 latency and 1.2 V operation
Capacity 128GB
This single 128GB module is built for DDR4 servers and workstations that require ECC load-reduced memory. It will not work in desktop or laptop systems. The octal-rank 3DS design lets a single DIMM deliver very high capacity for memory-intensive server workloads.
The load-reduced architecture reduces electrical loading on the memory bus, helping the module maintain stability during continuous server workloads. ECC corrects single-bit errors in real time, protecting data integrity across long-running tasks. CL21 latency at 2933 MHz supports consistent throughput under sustained demand.
Installation follows standard 288-pin DDR4 DIMM seating, but the system must explicitly support 128GB ECC LRDIMM modules with 2S4Rx4 3DS organisation. Compatibility fails when the platform does not qualify this rank and density combination. Consult the system manual for correct channel population rules before fitting the module.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 128GB 2S4Rx4 PC4-2933Y-L |
| Part Number | AT128G1D4D2933LO4N12V |
| Capacity | 128GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2S4Rx4 (8Rx4 3DS/TSV) |
| Multi-channel Kit | Single Module |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The module operates at the standard DDR4 voltage of 1.20V. Actual power draw depends on server workload and memory controller utilisation, but the low-voltage design helps limit heat output in dense configurations.
Your server must support DDR4 ECC Load Reduced DIMMs with 2S4Rx4 octal-rank 3DS/TSV organisation. Consult the system manual for qualified vendor lists, maximum capacity per slot and required channel population order.
Mixing Load Reduced and standard Registered DIMMs is not supported. All populated slots must use identical LRDIMM rank structure and speed; otherwise the memory controller will disable the mismatched channels.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม