我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
A green 288-pin DDR4 LRDIMM module with black memory chips, no heat spreader

A-Tech

A-Tech 128GB DDR4 2933 ECC LRDIMM 2S4Rx4 288-Pin Server RAM

SKU CH-P8B7-Z8HB7

128 GB DDR4 2933 ECC LRDIMM module with 2S4Rx4 octal-rank 3DS chips, CL21 latency and 1.2 V operation

  • Capacity128GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 128GB

  • 128 GB capacity expands server memory headroom for large datasets
  • DDR4 2933 MHz speed accelerates data throughput in compatible systems
  • ECC load-reduced design corrects errors while lowering electrical load on the memory bus
  • Octal-rank 3DS stacking fits maximum density into a single 288-pin module
  • 2 V operation matches standard DDR4 voltage for efficient power use

Single 128GB module for DDR4 servers

This single 128GB module is built for DDR4 servers and workstations that require ECC load-reduced memory. It will not work in desktop or laptop systems. The octal-rank 3DS design lets a single DIMM deliver very high capacity for memory-intensive server workloads.

Sustained load with ECC load-reduced design

The load-reduced architecture reduces electrical loading on the memory bus, helping the module maintain stability during continuous server workloads. ECC corrects single-bit errors in real time, protecting data integrity across long-running tasks. CL21 latency at 2933 MHz supports consistent throughput under sustained demand.

Install in validated server slots only

Installation follows standard 288-pin DDR4 DIMM seating, but the system must explicitly support 128GB ECC LRDIMM modules with 2S4Rx4 3DS organisation. Compatibility fails when the platform does not qualify this rank and density combination. Consult the system manual for correct channel population rules before fitting the module.

商品特色

  • 128 GB capacity expands server memory headroom for large datasets
  • DDR4 2933 MHz speed accelerates data throughput in compatible systems
  • ECC load-reduced design corrects errors while lowering electrical load on the memory bus
  • Octal-rank 3DS stacking fits maximum density into a single 288-pin module
  • 2 V operation matches standard DDR4 voltage for efficient power use

商品規格

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 128GB 2S4Rx4 PC4-2933Y-L
Part NumberAT128G1D4D2933LO4N12V
Capacity128GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank2S4Rx4 (8Rx4 3DS/TSV)
Multi-channel KitSingle Module
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much power does the 128GB DDR4 2933 module draw at its 1.20V rating?

The module operates at the standard DDR4 voltage of 1.20V. Actual power draw depends on server workload and memory controller utilisation, but the low-voltage design helps limit heat output in dense configurations.

What server memory slots and channel population rules must I check before installing this 288-pin LRDIMM?

Your server must support DDR4 ECC Load Reduced DIMMs with 2S4Rx4 octal-rank 3DS/TSV organisation. Consult the system manual for qualified vendor lists, maximum capacity per slot and required channel population order.

Can I mix this 2933 MT/s octal-rank LRDIMM with existing lower-rank DDR4 RDIMMs in the same server?

Mixing Load Reduced and standard Registered DIMMs is not supported. All populated slots must use identical LRDIMM rank structure and speed; otherwise the memory controller will disable the mismatched channels.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。