暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3 DIMM sticks with black chips, 240-pin

A-Tech

A-Tech 16GB (2x8GB) DDR3 1600MHz CL11 1.5V 240-Pin desktop RAM

SKU CH-9Y2G-KR5FV

A 16GB dual-channel DDR3 kit running at 1600MHz with CL11 latency and 1.5V operation for compatible desktop systems

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • Voltage1.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

Speed DDR3 1600 (PC3 12800)

  • 16 GB dual-channel kit speeds up multitasking with two 8 GB modules
  • 1600 MHz DDR3 frequency keeps data moving at PC3-12800 bandwidth
  • CL11 latency at 1.50 V delivers stable timing for everyday workloads
  • 240-pin unbuffered DIMMs fit standard desktop slots without registration
  • Rigorously tested non-ECC modules backed by lifetime warranty

16GB DDR3 Kit

This kit contains two 8GB unbuffered DIMMs that together provide 16GB of DDR3 memory for desktop systems. Each module operates at 1.5V and uses the standard 240-pin form factor. It is intended for computers that support DDR3 technology.

PC3-12800 Speed Rating

The modules are rated for 1600MHz operation with a CAS latency of 11, corresponding to the PC3-12800 bandwidth classification. This single specification determines whether the memory matches the motherboard's supported speed and timing requirements. Verify your system documentation for DDR3 1600 compatibility before purchase.

Dual-Rank 2Rx8 Organisation

Each 8GB stick uses a dual-rank 2Rx8 configuration, which affects how the memory controller addresses the chips. This organisation can influence maximum supported capacity per slot on some platforms. The kit includes only the two memory modules; no additional accessories or software are bundled.

特長

  • 16 GB dual-channel kit speeds up multitasking with two 8 GB modules
  • 1600 MHz DDR3 frequency keeps data moving at PC3-12800 bandwidth
  • CL11 latency at 1.50 V delivers stable timing for everyday workloads
  • 240-pin unbuffered DIMMs fit standard desktop slots without registration
  • Rigorously tested non-ECC modules backed by lifetime warranty

仕様

BrandA-Tech
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseSelect Compatible DDR3 Desktops

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the DDR3 1600MHz rating mean for real-world desktop performance?

The kit runs at 1600 MHz with CL11 latency, giving standard DDR3 bandwidth for everyday multitasking and application loading on compatible systems.

How does the PC3-12800 designation limit usable speed?

PC3-12800 confirms the modules are validated for 1600 MHz operation; the motherboard will not exceed this data rate without manual overclocking.

Will the 240-pin DIMMs fit my motherboard slots?

Yes, the 240-pin unbuffered DIMM form factor matches standard desktop DDR3 slots; verify your board supports 1.5 V dual-rank modules before installing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。