暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 16GB (2x8GB) DDR4 2933 ECC SODIMM CL21 1.2V laptop RAM

SKU CH-81H2-PTW2D

Dual-channel 16 GB DDR4 ECC SODIMM kit running at 2933 MHz with CL21 latency and 1.2 V operation for compatible microservers, mobile workstations and NAS servers

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 16GB (2 x 8GB)

CAS Latency CL21

  • 16 GB dual-channel kit for higher multitasking capacity
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • CL21 latency with 1.2 V operation for efficient performance
  • 260-pin SO-DIMM form factor fits compatible laptop slots

ECC SODIMM kit for workstations

This 16 GB kit contains two 8 GB DDR4 SO-DIMM modules rated at 2933 MHz with CL21 latency. ECC unbuffered operation adds single-bit error correction for data integrity. The 1.2 V modules suit mobile workstations, microservers and NAS appliances that require 260-pin DDR4 ECC memory.

Steady throughput with error correction

ECC circuitry detects and corrects single-bit errors during sustained workloads, preventing silent data corruption in long-running tasks. Unbuffered design keeps latency low while the dual-channel kit populates both slots for balanced bandwidth. JEDEC-standard 1.2 V power draw remains stable under continuous load.

Single-rank x8 organisation

Each module uses a 1Rx8 layout, a key factor for compatibility with platforms that limit rank population per channel. Verify your system's qualified-vendor list for 260-pin DDR4 ECC SODIMM support before purchase. Modules lacking this rank structure may not post in restricted configurations.

特長

  • 16 GB dual-channel kit for higher multitasking capacity
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • CL21 latency with 1.2 V operation for efficient performance
  • 260-pin SO-DIMM form factor fits compatible laptop slots

仕様

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM
ModelA-Tech 8GB 1Rx8 PC4-23400 ECC SODIMM
Part NumberNE-SS-0603
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the 1.2V DDR4 2933 kit draw under continuous load?

The modules run at 1.20V JEDEC standard voltage, so power draw stays at the DDR4 baseline for 2933 MHz CL21 operation.

Does my laptop need an ECC-capable SO-DIMM slot to use this 260-pin kit?

Yes — the system must support DDR4 ECC unbuffered SO-DIMM; standard non-ECC slots will not enable the error-correction function.

Will these single-rank 1Rx8 sticks work alongside older dual-rank DDR4 SODIMMs I already have?

Mixing ranks is possible if the platform allows it, but the memory controller will run all modules at the lowest common speed and timings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。