暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge contacts and black memory chips

A-Tech

A-Tech 16GB DDR4 2933 ECC SODIMM CL21 2Rx8 laptop RAM

SKU CH-1V47-EHZM4

16 GB DDR4-2933 ECC SODIMM module with CL21 latency and 1.2 V operation for compatible laptops and microservers

  • Capacity16GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 16GB

Speed DDR4 2933 (PC4 23400)

CAS Latency CL21

  • ECC protects data integrity in critical workloads with built-in error correction
  • 2933 MHz DDR4 speed accelerates multitasking and heavy applications
  • Dual-rank 2Rx8 organisation increases memory density for 16 GB capacity
  • JEDEC-standard 1.2 V operation reduces power draw and heat
  • 260-pin SO-DIMM form factor fits compatible laptops and microservers

16GB ECC SODIMM for Microservers and Workstations

This A-Tech module delivers 16GB of DDR4 2933 ECC memory in a 260-pin SO-DIMM form factor. It operates at 1.2V with CL21 latency and uses a 2Rx8 dual-rank layout. The unbuffered design suits compact servers, mobile workstations and NAS units that require error-correcting code memory.

Suits systems needing ECC SODIMM.

Builders upgrading Microservers, mobile workstations or NAS appliances that explicitly support DDR4 ECC unbuffered SO-DIMMs will benefit from the data-integrity feature. Buyers with standard consumer laptops or desktops that cannot use ECC modules should look at something else.

2Rx8 dual-rank organisation

The module is built as 2Rx8 dual-rank x8, which determines how the memory controller addresses the chips. Verify that your platform supports this rank configuration before purchasing, as some systems only accept single-rank modules.

特長

  • ECC protects data integrity in critical workloads with built-in error correction
  • 2933 MHz DDR4 speed accelerates multitasking and heavy applications
  • Dual-rank 2Rx8 organisation increases memory density for 16 GB capacity
  • JEDEC-standard 1.2 V operation reduces power draw and heat
  • 260-pin SO-DIMM form factor fits compatible laptops and microservers

仕様

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM
ModelA-Tech 16GB 2Rx8 PC4-23400 ECC SODIMM
Part NumberNE-SS-0578
Capacity16GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does this 260-pin DDR4 ECC SODIMM need a laptop or microserver motherboard that specifically supports ECC unbuffered memory?

Yes. The module is an ECC unbuffered SODIMM, so the system must explicitly support ECC on its DDR4 SO-DIMM slots; otherwise the extra error-correction bits will not be used and the module may not post.

If I add this 2Rx8 dual-rank stick beside an existing single-rank 2933 MHz module, will both run at the rated 2933 MHz CL21?

The memory controller will train all populated slots to a common speed and timing; mixed-rank configurations usually still run at 2933 MHz CL21, but the final frequency depends on the platform's memory controller capabilities.

How can I confirm the module is detected as 16 GB ECC at 2933 MHz with CL21 timings after installation?

Check the BIOS/UEFI memory information screen or run a tool such as CPU-Z or dmidecode; it should report 16 GB, DDR4-2933, CL21, ECC enabled, and 2Rx8 dual-rank organisation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。