暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR4 ECC UDIMM modules with gold contacts and black chips on a light surface

A-Tech

A-Tech 16GB (4x4GB) DDR4 2133 ECC UDIMM CL15 1Rx8 1.2V 288-Pin Server RAM

SKU CH-943Z-V6796

16 GB kit of four 4 GB DDR4 2133 MHz ECC UDIMM modules with CL15 latency for servers and workstations

  • CAS LatencyCL15
  • Rank1Rx8
  • 16 GB kit of four 4 GB modules expands server capacity
  • DDR4 2133 MHz CL15 timing accelerates data access
  • ECC unbuffered UDIMM detects and corrects memory errors
  • Single-rank 1Rx8 organisation simplifies channel population
  • 2 V standard voltage reduces power draw

16GB DDR4 ECC UDIMM kit

This A-Tech kit provides 16GB of DDR4 ECC unbuffered memory across four 4GB modules. It is built for servers and workstations that require error-correcting code support and 288-pin DIMM slots. The modules run at 2133 MHz with a CAS latency of 15 and operate at the standard 1.2V voltage. Each module uses a single-rank 1Rx8 organisation.

Suited for ECC-capable servers and workstations only

The kit suits administrators upgrading compatible DDR4 servers or workstations that accept unbuffered ECC UDIMMs. It is not suitable for desktop or laptop computers, which cannot use ECC unbuffered memory. Buyers who need non-ECC memory or higher-capacity modules should look elsewhere.

Straightforward DIMM installation with channel rules

Installation follows standard 288-pin DIMM seating in the correct memory channels as specified by the system manual. The most common issue is installing these modules in a desktop or laptop, which will not recognise the ECC unbuffered format. Verifying the platform's qualified vendor list before purchase prevents compatibility problems.

特長

  • 16 GB kit of four 4 GB modules expands server capacity
  • DDR4 2133 MHz CL15 timing accelerates data access
  • ECC unbuffered UDIMM detects and corrects memory errors
  • Single-rank 1Rx8 organisation simplifies channel population
  • 2 V standard voltage reduces power draw

仕様

CAS LatencyCL15
Rank1Rx8

この商品に関する質問

Does my motherboard need 288-pin DDR4 slots that support ECC unbuffered UDIMM modules?

Yes, this kit requires a server or workstation motherboard with 288-pin DDR4 slots that accept ECC unbuffered UDIMM modules; it will not work in standard desktop or laptop boards.

Can I mix these 2133 MHz CL15 1Rx8 modules with existing slower or higher-latency ECC UDIMM sticks?

The system will run all modules at the speed and timings of the slowest installed kit, so mixing is possible but overall memory performance will drop to the lowest common denominator.

How can I confirm the kit is running at 2133 MHz with CL15 timings and ECC active after installation?

Check the BIOS memory information screen or use a tool such as CPU-Z to verify the reported speed of 2133 MHz, CAS latency of 15, and that ECC status shows enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。