OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
A-Tech
16GB DDR3 1066 ECC registered server memory module with 4Rx4 organisation for compatible systems
This is a single 16GB DDR3 1066 (PC3-8500) ECC registered DIMM built with major-brand chips. It runs at 1.50V with CL7 latency and a 4Rx4 organisation on a 240-pin form factor. The module is a direct replacement for Hynix HMT42GR7AMR4C-G7, HMT42GR7BMR4C-G7 and HMT42GR7CMR4C-G7 server memory.
IT teams maintaining systems that require DDR3 1066 registered ECC modules with a 4Rx4 rank layout will find this part a compatible match. Builders whose platforms need unbuffered UDIMMs, a different rank structure, or a higher or lower DDR3 speed should look elsewhere.
The 4Rx4 rank configuration is the critical spec that decides whether this module works in a given server board; the memory controller must support this exact organisation for the DIMM to be recognised and operate correctly.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module fits a standard 240-pin DDR3 DIMM slot and runs at the JEDEC 1.5 V specification.
Mixing ranks is possible if the motherboard supports 4Rx4 modules and the total rank count per channel stays within the platform limit.
Check the BIOS memory information or run a tool such as dmidecode to verify 1066 MT/s speed, CL7 latency and ECC enabled status.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?