暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 16GB DDR3L 1600 SODIMM 204-Pin 1.35V CL11

SKU CH-QD92-JF149

A 16GB DDR3L 1600 SODIMM module running at 1.35V with CL11 latency for laptop memory upgrades

  • Capacity16GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 16 GB single module doubles laptop capacity
  • DDR3L 1600 MHz PC3L-12800 speed
  • CL11 latency at 1.35 V low voltage
  • 204-pin SODIMM fits standard laptop slots
  • Tested replacement for Micron MT16KTF2G64HZ-1G6 modules

Capacity and Compatibility

This A-Tech module provides 16GB of DDR3L memory in a single 204-pin SODIMM form factor. It operates at 1600MHz with a CAS latency of CL11 and a low voltage of 1.35V. The unbuffered, non-ECC design targets standard laptop and all-in-one system upgrades.

Suitability and Limits

This upgrade suits owners of compatible notebooks or all-in-one PCs that accept DDR3L SODIMM modules and require a density of 16GB per slot. It is not for systems limited to 1.5V DDR3, machines restricted to 8GB maximum per slot, or desktops needing full-size DIMMs.

Deciding Specification

The 16GB density in a single rank 2Rx8 DDR3L SODIMM package is the critical specification. Your system motherboard and BIOS must explicitly support 16GB modules at 1.35V to recognise the full capacity.

特長

  • 16 GB single module doubles laptop capacity
  • DDR3L 1600 MHz PC3L-12800 speed
  • CL11 latency at 1.35 V low voltage
  • 204-pin SODIMM fits standard laptop slots
  • Tested replacement for Micron MT16KTF2G64HZ-1G6 modules

仕様

BrandA-Tech
Capacity16GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

この商品に関する質問

Will this DDR3L 1600 SODIMM run at the correct speed alongside my existing DDR3 modules?

The module operates at DDR3L 1600 (PC3L-12800) with CL11 latency and 1.35 V. If your current memory is DDR3L 1600 the speeds match; if it is slower the system will run both at the lower speed.

How can I verify the 16 GB module is detected and running at 1600 MHz after installation?

Open Task Manager or your BIOS/UEFI and confirm the installed capacity shows 16 GB and the reported speed reads 1600 MHz (PC3L-12800).

Does the package contain only the single 204-pin SODIMM or are any tools or adapters included?

The box contains one 16 GB 204-pin DDR3L SODIMM module; no tools, brackets or additional adapters are supplied.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。