저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

A-Tech

A-Tech 16GB DDR3L 1600 SODIMM 204-Pin 1.35V CL11

SKU CH-QD92-JF149

A 16GB DDR3L 1600 SODIMM module running at 1.35V with CL11 latency for laptop memory upgrades

  • Capacity16GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 16 GB single module doubles laptop capacity
  • DDR3L 1600 MHz PC3L-12800 speed
  • CL11 latency at 1.35 V low voltage
  • 204-pin SODIMM fits standard laptop slots
  • Tested replacement for Micron MT16KTF2G64HZ-1G6 modules

Capacity and Compatibility

This A-Tech module provides 16GB of DDR3L memory in a single 204-pin SODIMM form factor. It operates at 1600MHz with a CAS latency of CL11 and a low voltage of 1.35V. The unbuffered, non-ECC design targets standard laptop and all-in-one system upgrades.

Suitability and Limits

This upgrade suits owners of compatible notebooks or all-in-one PCs that accept DDR3L SODIMM modules and require a density of 16GB per slot. It is not for systems limited to 1.5V DDR3, machines restricted to 8GB maximum per slot, or desktops needing full-size DIMMs.

Deciding Specification

The 16GB density in a single rank 2Rx8 DDR3L SODIMM package is the critical specification. Your system motherboard and BIOS must explicitly support 16GB modules at 1.35V to recognise the full capacity.

주요 특징

  • 16 GB single module doubles laptop capacity
  • DDR3L 1600 MHz PC3L-12800 speed
  • CL11 latency at 1.35 V low voltage
  • 204-pin SODIMM fits standard laptop slots
  • Tested replacement for Micron MT16KTF2G64HZ-1G6 modules

사양

BrandA-Tech
Capacity16GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

이 상품에 대한 질문

Will this DDR3L 1600 SODIMM run at the correct speed alongside my existing DDR3 modules?

The module operates at DDR3L 1600 (PC3L-12800) with CL11 latency and 1.35 V. If your current memory is DDR3L 1600 the speeds match; if it is slower the system will run both at the lower speed.

How can I verify the 16 GB module is detected and running at 1600 MHz after installation?

Open Task Manager or your BIOS/UEFI and confirm the installed capacity shows 16 GB and the reported speed reads 1600 MHz (PC3L-12800).

Does the package contain only the single 204-pin SODIMM or are any tools or adapters included?

The box contains one 16 GB 204-pin DDR3L SODIMM module; no tools, brackets or additional adapters are supplied.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.