EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
16 GB DDR4 2400 ECC registered DIMM with CL17 latency and 1.2 V operation
This 16 GB DDR4 module operates at 2400 MHz with CL17 latency and a registered design. It uses a 1Rx4 organisation and Major Brand Chips to deliver error-correcting memory for compatible server and workstation platforms.
The module runs at the standard 1.2 V DDR4 voltage while the registered buffer reduces electrical load on the memory controller. ECC functionality detects and corrects single-bit errors to maintain data integrity under sustained workloads.
This stick uses the 288-pin DDR4 DIMM layout required by supporting server and workstation motherboards. Systems that accept only unbuffered UDIMMs or a different pin count will not be compatible with this registered module.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the server recognises the 16 GB at 2400 MHz with ECC active.
No routine maintenance is required; if a memory error appears, run the server's built-in diagnostics to isolate the faulty 16 GB stick and replace it with an identical DDR4 2400 ECC RDIMM.
The CAS latency of 17 cycles at 2400 MHz sets the response-time floor, so sustained throughput is bounded by that timing rather than the 1.2 V power envelope.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?