暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, gold edge connector, no heat spreader

A-Tech

A-Tech 16GB DDR4 2400 ECC SODIMM CL17 1.2V 260-Pin

SKU CH-HS44-NVZC4

16 GB DDR4 2400 ECC SODIMM for Micron MTA18ASF2G72HZ-2G3B1 microserver upgrades

  • Capacity16GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • ECC protection prevents data errors in critical workloads
  • 16GB DDR4 2400 CL17 1.2V SODIMM
  • Direct replacement for Micron MTA18ASF2G72HZ-2G3B1
  • Unbuffered design fits microserver and workstation slots
  • 260-pin form factor installs in standard laptop sockets

16GB DDR4 2400 ECC SODIMM

This 16GB DDR4 2400 ECC SODIMM module operates at CL17 latency and 1.20V. It uses a 260-pin unbuffered design without a heat spreader. The module serves as a compatible replacement for Micron MTA18ASF2G72HZ-2G3B1 in microserver and workstation systems.

Microservers and ECC workstations

This module suits builders upgrading Micron-compatible microservers or workstations that require ECC unbuffered SO-DIMM memory. It is not for laptops or consumer boards that only accept non-ECC SODIMMs. Buyers who need registered DIMMs or higher-speed DDR4 should look at other modules.

16GB single-module capacity

The 16GB capacity handles virtualisation workloads and multi-service NAS duties comfortably. Headroom narrows when running many simultaneous containers or large in-memory databases that exceed the single-module limit. Systems with multiple slots can add further modules to extend total memory.

特長

  • ECC protection prevents data errors in critical workloads
  • 16GB DDR4 2400 CL17 1.2V SODIMM
  • Direct replacement for Micron MTA18ASF2G72HZ-2G3B1
  • Unbuffered design fits microserver and workstation slots
  • 260-pin form factor installs in standard laptop sockets

仕様

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA18ASF2G72HZ-2G3B1
Capacity16GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMTA18ASF2G72HZ-2G3B1
Recommend UseCompatible Replacement for Micron MTA18ASF2G72HZ-2G3B1

この商品に関する質問

Does my laptop need a 260-pin DDR4 SO-DIMM slot to accept this module?

Yes, this is a 260-pin DDR4 SO-DIMM running at 2400 MHz with CL17 latency and 1.20 V operation, so the system must provide a matching DDR4 SO-DIMM socket.

Can I add this 16 GB ECC unbuffered stick alongside non-ECC memory already in my microserver?

Mixing ECC unbuffered modules with non-ECC memory typically disables error correction and may prevent boot; the platform should be populated with matching ECC modules for reliable operation.

How do I confirm the module is running at DDR4 2400 CL17 with ECC active after installation?

Check the BIOS or UEFI memory information screen — it should report 2400 MHz speed, CL17 timings, 1.2 V voltage and ECC enabled for the installed 16 GB module.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。