NEMIX RAM
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
62.908,99 US$
0.79126824BTC
En stock
A-Tech
A-Tech 16GB DDR4 2400 ECC SODIMM CL17 1.2V 260-Pin
16 GB DDR4 2400 ECC SODIMM for Micron MTA18ASF2G72HZ-2G3B1 microserver upgrades
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCYes
- ECC protection prevents data errors in critical workloads
- 16GB DDR4 2400 CL17 1.2V SODIMM
- Direct replacement for Micron MTA18ASF2G72HZ-2G3B1
- Unbuffered design fits microserver and workstation slots
- 260-pin form factor installs in standard laptop sockets
16GB DDR4 2400 ECC SODIMM
This 16GB DDR4 2400 ECC SODIMM module operates at CL17 latency and 1.20V. It uses a 260-pin unbuffered design without a heat spreader. The module serves as a compatible replacement for Micron MTA18ASF2G72HZ-2G3B1 in microserver and workstation systems.
Microservers and ECC workstations
This module suits builders upgrading Micron-compatible microservers or workstations that require ECC unbuffered SO-DIMM memory. It is not for laptops or consumer boards that only accept non-ECC SODIMMs. Buyers who need registered DIMMs or higher-speed DDR4 should look at other modules.
16GB single-module capacity
The 16GB capacity handles virtualisation workloads and multi-service NAS duties comfortably. Headroom narrows when running many simultaneous containers or large in-memory databases that exceed the single-module limit. Systems with multiple slots can add further modules to extend total memory.
Puntos fuertes
- ECC protection prevents data errors in critical workloads
- 16GB DDR4 2400 CL17 1.2V SODIMM
- Direct replacement for Micron MTA18ASF2G72HZ-2G3B1
- Unbuffered design fits microserver and workstation slots
- 260-pin form factor installs in standard laptop sockets
Especificaciones
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MTA18ASF2G72HZ-2G3B1 |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | MTA18ASF2G72HZ-2G3B1 |
| Recommend Use | Compatible Replacement for Micron MTA18ASF2G72HZ-2G3B1 |
Preguntas sobre este artículo
Does my laptop need a 260-pin DDR4 SO-DIMM slot to accept this module?
Yes, this is a 260-pin DDR4 SO-DIMM running at 2400 MHz with CL17 latency and 1.20 V operation, so the system must provide a matching DDR4 SO-DIMM socket.
Can I add this 16 GB ECC unbuffered stick alongside non-ECC memory already in my microserver?
Mixing ECC unbuffered modules with non-ECC memory typically disables error correction and may prevent boot; the platform should be populated with matching ECC modules for reliable operation.
How do I confirm the module is running at DDR4 2400 CL17 with ECC active after installation?
Check the BIOS or UEFI memory information screen — it should report 2400 MHz speed, CL17 timings, 1.2 V voltage and ECC enabled for the installed 16 GB module.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
57.634,99 US$
0.72493195BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
53.038,99 US$
0.66712354BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
70.395,99 US$
0.8854396BTC
En stock