暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 2666 CL19 1.2V 288-pin desktop RAM

SKU CH-BPCN-9Q442

A 16 GB DDR4 desktop module running at 2666 MHz with CL19 latency and 1.2 V on a 288-pin DIMM

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • Tested Frequency2666
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2666 MHz speed accelerates data transfer rates
  • CL19 latency timing supports responsive system operation
  • 2 V standard voltage reduces power consumption
  • 288-pin DIMM form factor fits compatible desktop motherboards

A-Tech 16GB DDR4 2666 CL19 Desktop Memory

This 16GB DDR4 module runs at 2666MHz with a CAS latency of CL19 and operates at the standard 1.20V. It is an unbuffered, non-ECC DIMM designed for desktop systems that support DDR4 memory. The 288-pin form factor fits standard desktop slots. It targets users needing a straightforward capacity increase for everyday multitasking and general workloads.

Replaces Kingston KCP426ND8/16

This module serves as a direct replacement for Kingston part numbers KCP426ND8/16, ACR26D4U9D8MH-16, KTP9W1-MIE, and KVR26N19D8/16. The jump is worth it when your system currently runs less than 16GB or uses slower DDR4 speeds, and the motherboard supports 2666MHz operation. Matching the existing voltage and latency helps maintain stability without manual tuning.

Straightforward 288-Pin DIMM Installation

Installation follows the standard desktop DIMM procedure: align the notch, press firmly until the retention clips click, and verify detection in the BIOS. Common issues arise when the motherboard does not support 2666MHz natively and defaults to a lower speed, or when mixing modules with different timings prevents dual-channel operation. Verifying the supported memory specifications of your system before purchase avoids these problems.

特長

  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2666 MHz speed accelerates data transfer rates
  • CL19 latency timing supports responsive system operation
  • 2 V standard voltage reduces power consumption
  • 288-pin DIMM form factor fits compatible desktop motherboards

仕様

BrandA-Tech
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
Tested Frequency2666
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

この商品に関する質問

Will this 288-pin DDR4 DIMM fit my desktop motherboard?

This module uses the standard 288-pin DDR4 DIMM form factor at 1.20V. It fits any desktop board with a DDR4 slot that accepts 2666MHz non-ECC unbuffered memory.

What is the common mistake when installing this 16GB DDR4 2666 module?

The notch on the 288-pin edge connector must align with the slot key; forcing it backwards bends the gold contacts. Press straight down until both side clips click audibly.

Does this CL19 1.2V DDR4 module need any firmware updates or battery changes over time?

No firmware or battery is involved. The JEDEC-standard 1.2V DDR4 ICs are solid-state; only occasional dust removal from the slot and contacts is needed for long-term reliability.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。